SHIELD AS-HEAT 4434803 - Caterpillar

Illustration 1 g01188636
(1) Flywheel gear
(2) Flywheel Note: Refer to Systems Operation/Testing and Adjusting for the correct method for flywheel runout and flywheel inspection.Note: Replace the twelve bolts (3) at service.
Apply 6V-4876 Lubricant to the threads of the bolts (3) before assembly. Note: Tighten the twelve bolts in a circular pattern. The circular pattern can be in a clockwise direction or in a counterclockwise direction.
Torque each bolt to 100 5 N m (75 4 lb ft). Note: Tighten the twelve bolts again with the circular pattern that was used in Step 2.
Turn each bolt by an additional 180 5 degrees.