SHIELD-HEAT 4756817 - Caterpillar

1. Put identification on three hoses (4) and disconnect hoses from cylinder.2. Remove bolt (2) that holds the hose clip to the cylinder.3. Remove the bolt (3) that holds the rod end of the cylinder to the front link. 4. Remove cylinder (6) for steering follow-up sender after removing nut (1) that holds the head end of the cylinder to the bracket (5).Install Steering Follow-Up Sender Cylinder
1. Install cylinder (3) and nut (1) that holds the head end of the cylinder to the bracket (5).2. Install bolt (4) that holds the rod end of the cylinder to the front link.3. Install the bolt (2) that holds the hose clip to the cylinder.4. Connect the three hoses (6) to the cylinder. Turn the machine full right to full left several times to remove air from the system.
Machine can move suddenly until all air is removed from the system.