SHIELD AS-EXHAUST 4978319 - Caterpillar

Illustration 24 g06188563
(1) 1S-2563 Plug
(11) 241-4695 Oil Pan
Install plug (1) on oil pan (11).
Illustration 25 g06188611
(3) 7K-1181 Cable Strap
(24) 212-0430 Stud
(28) 344-5675 Nut
(38) 7B-1597 Clip
(43) 8T-4121 Hard Washer
(48) 527-0046 Tube
Install tube (48) using four clips (38), stud (24), nut (28), two washers (43), and existing hardware. Secure the harness to tube (48) using nine cable straps (3).
Illustration 26 g06188624
(12) 261-3162 Oil Level Gauge (Dipstick)
(27) 246-7899 Tube As
Install tube assembly (27) and oil gauge (12).
Illustration 27 g06188625
(BC) Cover plate
(BD) Gasket
(BE) Bolt
(BF) Washer
(BG) Nut
Remove and discard cover plate (BC), gasket (BD), and two set of bolts (BE), washers (BF), and nuts (BG).
Illustration 28 g06188683
(BH) Harness clip
(5) 135-9819 Integral Seal
(12a) Gauge bracket
(19) 513-1499 Tube As
(20) 522-0283 Spacer
(22) 143-4535 Clip
(23) 143-4536 Clip
(32) 4D-7388 Clip
(34) 5P-8245 Hard Washer
(36) 6V-5696 Bolt
(37) 6V-8149 Nut
(39) 7X-2544 Bolt
(41) 7X-3392 Hard Washer
Install tube assembly (19) and seal (5) using two bolts (36), four washers (34), and two nuts (37).
Fasten and secure tube assembly (19) to the elbow using the following components: fumes hose clip (32), gauge bracket (12a), harness clip (BH), spacer (20), bolt (39), washer (41), clip (22), and clip (23). Refer to Illustration 28.Note: Use one washer (41) as a spacer as shown.
Illustration 29 g06188691
(V) 5P-0597 Hose Clamp
(W) 226-3534 Fumes Disposal Hose
(X) 5P-4325 Clip
(Y) 220-1718 Bracket
(Z) 6V-5217 Bolt
(AA) 9M-1974 Hard Washer
(AB) 5P-7970 Nut
Install existing hose clamp (V), fumes hose (W), clip (X), bracket (Y), two bolts (Z), two washers (AA), and nut (AB) removed during Step 10. Refer to Illustration 29.
Illustration 30 g06188715
(16) 385-1450 Engine Oil Filler Cap As
(19) 513-1499 Tube As
Install cap assembly (16) onto tube assembly (19). Secure chain to filler tube fitting.Note: Secure chain to filler tube fitting.
Fill oil pan with 30 L (7.9 US gal) of appropriate engine oil.
Illustration 31 g06188732
(17) 513-1488 Cover As
(18) 513-1489 Plate
(40) 7X-2553 Bolt
(43) 8T-4121 Hard Washer
(44) 8T-4195 Bolt
(47) 9X-8257 Washer
Install cover assembly (17) using four bolts (40) and washers (47).
Install plate (18) using four bolts (44) and washers (43). Refer to Illustration 31.