6N2451 SHIELD ASSEM. Caterpillar parts
594H, D9H
Rating:
Alternative (cross code) number:
CA6N2451
6N-2451
6N2451
CA6N2451
6N-2451
6N2451
Weight: 10 pounds 4 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Caterpillar parts catalog:
Information:
Removal Procedure
Personal injury can result from failure to disconnect the battery.First, disconnect the negative battery cable. Then, disconnect the positive battery cable.A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
Illustration 1 g01261435
Place an index mark on all of the harness assemblies. Disconnect the harness assemblies from electric starting motor (2).
Fasten a suitable lifting device to electric starting motor (2). The weight of electric starting motor (2) is approximately 24 kg (53 lb).
Remove bolts (1) and the washers.
Remove electric starting motor (2) and the gasket from the flywheel housing. Installation Procedure
Illustration 2 g01261435
Fasten a suitable lifting device to electric starting motor (2). The weight of electric starting motor (2) is approximately 24 kg (53 lb).
Position the gasket and electric starting motor (2) in the flywheel housing. Install bolts (1) and the washers.
Connect the harness assemblies to electric starting motor (2). Refer to Specifications, "Electric Starting Motor".
Personal injury can result from failure to disconnect the battery.First, disconnect the negative battery cable. Then, disconnect the positive battery cable.A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
Illustration 1 g01261435
Place an index mark on all of the harness assemblies. Disconnect the harness assemblies from electric starting motor (2).
Fasten a suitable lifting device to electric starting motor (2). The weight of electric starting motor (2) is approximately 24 kg (53 lb).
Remove bolts (1) and the washers.
Remove electric starting motor (2) and the gasket from the flywheel housing. Installation Procedure
Illustration 2 g01261435
Fasten a suitable lifting device to electric starting motor (2). The weight of electric starting motor (2) is approximately 24 kg (53 lb).
Position the gasket and electric starting motor (2) in the flywheel housing. Install bolts (1) and the washers.
Connect the harness assemblies to electric starting motor (2). Refer to Specifications, "Electric Starting Motor".
Parts shield Caterpillar catalog:
7N2669
SHIELD GP-TURBOCHARGER
594H, D9H
594H, D9H
4N7082
SHIELD-OIL FILTER
1693, 16G, 16H NA, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3512, 3516, 375, 375 L, 5080, 5110B, 5230, 578, 583R, 583T, 587R, 587T, 621, 621B, 621E, 621F, ...
1693, 16G, 16H NA, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3512, 3516, 375, 375 L, 5080, 5110B, 5230, 578, 583R, 583T, 587R, 587T, 621, 621B, 621E, 621F, ...
2P4219
SHIELD ASSEM. (R.H. Upper)
594H, D9G, D9H
594H, D9G, D9H
6N2457
SHIELD ASSEM.
594H, D9H
594H, D9H
6N2452
SHIELD ASSEM.
594H, D9H
594H, D9H
7N6319
SHIELD
D9H
D9H
6N2452
SHIELD ASSEM.
594H, D9H
594H, D9H
6N2457
SHIELD ASSEM.
594H, D9H
594H, D9H
7J9269
SHIELD ASSEM. (L.H.)
983, 983B
983, 983B
7J9270
SHIELD ASSEM. (R.H.)
983, 983B
983, 983B
3A4462
SHIELD ASSEM. (Lower R.H.)
941, 951B
941, 951B
4N9156
SHIELD ASSEM. (Upper R.H.)
941, 951B
941, 951B