SHIM 0325807 - Caterpillar

Illustration 1 g01410075
Front axle (1) Inspection plugs
Illustration 2 g01410077
Rear axle (1) Inspection plugsEach axle has two threaded inspection plugs (1) that are used for inspecting the corresponding brake disc. The inspection plugs are located on the front of the front axle and on the rear of the rear axle. The procedure to check the front brake discs for wear is identical for the rear brake discs.
Stop the engine. Engage the parking brake. Remove the inspection plug for the brake disc that is being checked.Note: The following steps require accumulator pressure.
Hold down either brake pedal. This will hold the piston, the brake disc, and the plate together.
Perform one of the following steps in order to check the brake disc for wear.Note: A light and a mirror are needed in order to view the brake discs through the ports.
Use a feeler gauge, or one of the brake wear gauges in Table 1 to measure the thickness of the brake disc. The minimum thickness of the friction disc should be within the specifications that are in Table 2.
Table 2
Single Disc Brakes    
Model     Serial Number     Min Thickness of Disc     Thickness of New Disc     Min Groove Depth     Brake Wear    
924H/ 924Hz Rear Brake     RCB1-UP
WLB1-UP
HXC1-UP
PED1-UP
JTM1-UP
KLN1-UP    
6.79 mm (0.267 inch)    
7.95 mm (0.313 inch)    
0.32 mm (0.013 inch)     Percent of Remaining Life     Thickness of Friction Disc    
100
7.95 mm (0.313 inch)    
80
7.72 mm (0.304 inch)    
60
7.49 mm (0.295 inch)    
40
7.25 mm (0.285 inch)    
20
7.02 mm (0.276 inch)    
0
6.79 mm (0.267 inch)    
924H/ 924Hz Front Brake     RCB1-UP
HXC1-UP
PED1-UP
JTM1-UP
WLB1-UP
KLN1-UP    
6.35 mm (0.250 inch)    
7.8 mm (0.307 inch)    
0.32 mm (0.013 inch)     100    
7.8 mm (0.307 inch)    
80
7.51 mm (0.296 inch)    
60
7.22 mm (0.284 inch)    
40
6.93 mm (0.273 inch)    
20
6.64 mm (0.261 inch)    
0
6.34 mm (0.250 inch)    
928Hz/ 930H Front Brake     BYD1-UP
CXK1-UP
DHC1-UP
FTD1-UP
RSB1-UP    
7.65 mm (0.300 inch)    
9.10 mm (0.358)    
0.32 mm (0.013 inch)     100    
9.10 mm (0.358 inch)    
80
8.81 mm (0.347 inch)    
60
8.52 mm (0.335 inch)    
40
8.23 mm (0.324 inch)    
20
7.94 mm (0.3126 inch)    
0
7.65 mm (0.301 inch)    
928Hz/ 930H Rear Brake     BYD1-UP
CXK1-UP
DHC1-UP
FTD1-UP
RSB1-UP    
8.07 mm (0.318 inch)    
9.23 mm (0.363 inch)    
0.32 mm (0.013 inch)     100    
9.23 mm (0.363 inch)    
80
9.00 mm (0.354 inch)    
60
8.77 mm (0.345 inch)    
40
8.54 mm (0.336 inch)    
20
8.31 mm (0.327 inch)    
0
8.08 mm (0.318 inch)    
Dual Disc Brakes    
Model     Serial Number     Min Thickness     Thickness of New Disc     Min Groove Depth     Brake Wear    
924H/ 924Hz Rear Dual Disc Brake     WLB1-UP
HXC1-UP
JTM1-UP
KLN1-UP
PED1-UP
RCB1-UP    
4.64 mm (0.183 inch)    
5.8 mm (0.228 inch)    
0.32 mm (0.013 inch)     Percent of Remaining Life     Thickness of Friction Disc    
100
5.8 mm (0.228 inch)    
80
5.57 mm (0.219