SHIM 0546535 - Caterpillar

Illustration 1 g01108050
Illustration 2 g01109626
The label for joystick steering is displayed on this label. The label is located below toggle switch (1) .Push toggle switch (1) to the middle position in order to activate the controls for the joystick steering.
Illustration 3 g01107533
Note: When the cab is positioned over the fixed rear axle, the function of the joystick steering is reversed. The function of the travel speed pedal is also reversed.
Right Turn (2) - Move the top switch to the right on the right joystick in order to steer the machine to the right. The turning angle increases as the result of a greater amount of force applied to the right side of the top switch on the right joystick.
Left Turn (3) - Move the top switch to the left on the right joystick in order to steer the machine to the left. The turning angle increases as the result of a greater amount of force applied to the left side of the top switch on the right joystick. Note: If the second gear is active the system will not allow the operator to activate the Joystick Steering. The monitor will display a warning that the joystick steering is not active. If the joystick steering is active the system will not allow the operator to engage into second gear. Note: When joystick steering is active, the system allows the operator to gain temporary access to the medium pressure function. The operator must press the front button on the left joystick for temporary access to the medium pressure function. When the front button on the left joystick is released, the joystick steering becomes reactive. Temporary access to the medium pressure function does not apply to Material Handlers.