SHIM 0546538 - Caterpillar

Illustration 1 g01217074
(1) Marine Power Display (MPD)
(2) Pyrometer (if equipped)
(3) Engine control switch (ECS)
(4) Emergency stop switch
(5) Overspeed Indicator
(6) Alarm (horn)
(7) Starter select switch (if equipped)
(8) Emergency stop lamp Marine Power Display (MPD) (1)
The Caterpillar Marine Power Display is an attachment that is available from your Caterpillar dealer. The Caterpillar Marine Power Display will supply the current engine data. The Caterpillar Marine Power Display will supply the current data for the transmission. The screens can be customized. The screens can display various engine parameters. The parameters are described in the following text.Operating Information
There are three modes of display for the engine data: Analog, digital and bar graph. The following parameters are displayed: Engine Speed, Percent Load, Boost Pressure, Coolant Temperature, Oil Pressure, Oil Temperature, Fuel Rate, Fuel Pressure, Fuel Temperature, Inlet Manifold Temperature, Transmission Temperature, Transmission Pressure, Engine Hours and Battery Voltage.Note: The Oil Temperature and the Inlet Manifold Temperature will be displayed if the engine is equipped with the appropriate sensors.Display Modes
Illustration 2 g00744779
(1) Alarm acknowledgment
(2) Screen display
(3) Arrow keys Day Mode - The normal display is a white background with black letters and gauges. Press and hold down screen display (2) in order to display the slide bar that adjusts the contrast. Use arrow keys (3) to adjust the contrast.Night Mode - Press screen display (2) in order to change the display. The display will have a black background with red letters and gauges. Press and hold down screen display (2) again in order to display the slide bar that adjusts the brightness. Use arrow keys (3) to adjust the brightness. Press screen display (2) again in order to display the slide bar that adjusts the contrast while the Backlight is on. Use arrow keys (3) to adjust the contrast. Press screen display (2) in order to exit the slide bar that adjusts the contrast.Diagnostic Data
All diagnostic messages from the Electronic Control Module (ECM) of the engine are indicated by both a visual alarm and an audible alarm. Diagnostic indicators will not be shown when there are no active diagnostic codes. The diagnostic indicator will appear in the upper left corner of the screen. A window that describes the diagnostic code will appear in the center of the screen, and the audible alarm will sound. Press "alarm acknowledgment" key (1) in order to silence the alarm. Press "alarm acknowledgment" key (1) again in order to scroll through the diagnostic codes or remove the diagnostic codes. The diagnostic code indicator will remain on the screen until the fault is corrected.Note: The loss of signal to the display will result in a Diagnostic Code with the description “"NO DATA LINK SIGNAL"”.Configuration and Operation of the Marine Power display
The Caterpillar Marine Power Display can be programmed for three users with five screens for each user. Three users can set up the Caterpillar Marine Power Display for the preferences of each user.The buttons have multiple functions that are dependent on the screen that is displayed.Reference: See Operator Manual, LEBM0189, "Marine Power Display"