SHIM 0875976 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     9S-3263     Thread Lock Compound     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the O-ring seals. If the O-ring seals are worn or damaged, use new parts for replacement. Apply clean engine oil to the O-ring seals.
Illustration 1 g00524251
Install the O-ring seals and elbow assembly (13) on the BrakeSaver control valve.
Position BrakeSaver control valve (11) on the oil pan. The weight of the BrakeSaver control valve is approximately 22 kg (50 lb). Install bolts (12) .
Illustration 2 g00524244
Install oil temperature sensing unit (4) in the BrakeSaver control valve.
Connect air tube assembly (5) and hose assembly (6) to the BrakeSaver control valve.
Illustration 3 g00524237
Install the O-ring seals in manifold (2). Position manifold (2) on the BrakeSaver Control valve. Install bolts (1) and (3) .
Illustration 4 g00524248
Inspect the O-ring seals and install tube assemblies (9) and (10) .
Illustration 5 g00524245
Position the tube assemblies in the BrakeSaver control valve. Install retainer (8) and bolt (7) .Note: If the bottom plug in the oil pan was removed, put the split (seam) of the gasket for the plug against the oil pan. If either plug on the side of the oil pan was removed, apply Tooling (A) to the threads and tighten to a torque of 80 11 N m (59 8 lb ft).
Fill the engine with oil to the correct level. Refer to Operation and Maintenance Manual, "Refill Capacities".