SHIM 0918580 - Caterpillar

Illustration 1 g03818409
Right side view
Table 1
Specification for 269-5173 Stub Boom
Item Qty Part Specification description
All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, the stick, the upper frame, the bushing, and the cylinder pin bores.
1 1 4I-4621 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
2 As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):
2 093-0084 Shim Thickness of one shim is 1.0 mm (0.04 inch).
1 7Y-2497 Shim Thickness of one shim is 1.6 mm (0.06 inch).
1 093-0116 Shim Thickness of one shim is 2.0 mm (0.08 inch).
3 1 264-1702 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
4 1 176-2278 Pin Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
5 2 7X-4803 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
6 2 228-5615 Bushing Install the bushing in the bore so that the part number of the bushing is facing outward.
Bore before installation is 90.21 0.04 mm (3.552 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
7 As required, use the following shims in order to adjust the maximum lateral clearance of 0.8 mm (0.03 inch).
Mount the steel shim in order to be located at the boom side.
2 093-0084 Shim Thickness of one shim is 1.0 mm (0.04 inch).
1 7Y-2497 Shim Thickness of one shim is 1.6 mm (0.06 inch).
1 093-0116 Shim Thickness of one shim is 2.0 mm (0.08 inch).