SHIM,INJECTI 1150090 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Turn the battery disconnect switch to the OFF position.
Turn the fuel supply to the OFF position.
Illustration 1 g01423674
Open hood assembly (1) .
Illustration 2 g01424030
Disconnect hose assemblies (4). Remove bolts (3). Remove secondary fuel filter base (2) .Installation Procedure
Illustration 3 g01424030
Position secondary fuel filter base (2) and install bolts (3). Tighten bolts (3) to a torque of 32 3 N m (24 2 lb ft).
Connect hose assemblies (4) .
Illustration 4 g01423674
Close hood assembly (1) .
Turn the fuel supply to the ON position.