1279483 SHIM Caterpillar parts
45, 5110B, 55, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 924G, 924GZ, 924H, 924HZ, 966G, 966G II, 966H, 966K, 966M, 9...
Rating:
Alternative (cross code) number:
CA1279483
127-9483
1279483
CA1279483
127-9483
1279483
Weight: 0.02 pounds 0 kg.
CHALLENGER, WHEEL TRACTOR-SCRAPER,
This part in 2 request:
Show.
This information for suppliers only!
2016-08-29
2016-08-25
Compatible equipment models: 1279483:
Number on catalog scheme:
5
For full view, you need register
Information:
Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Remove the engine side guards. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".
Remove the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Drain the hydraulic system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper draining procedure.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper draining procedure.
Illustration 1 g01261603
Remove bolts (1). Remove plate assembly (2).
Illustration 2 g01261607
Loosen clamp (4) and disconnect hose (3).
Loosen clamp (6) and disconnect hose (5).
Disconnect harness assemblies (7) and remove bolt (8).
Illustration 3 g01261698
Disconnect hose assembly (9).
Loosen clamp (10) and disconnect hose (11). Loosen clamp (12) and disconnect hose (13).
Loosen clamp (14) and disconnect hose (15).
Illustration 4 g01261733
Disconnect hose assemblies (16) and (17).
Remove clamp (18).
Illustration 5 g01261734
Illustration 6 g01261957
Tension the track to gain access to bolt (19). Refer to Operation and Maintenance Manual, "Track - Check/Adjust". Remove bolt (19). Use Tooling (A) to remove pin (20). Repeat for the opposite side of the machine.
Illustration 7 g01261971
Remove hose (21).
Remove hose (22).
Disconnect hoses (23) and (24).
Illustration 8 g01262125
Remove bolts (25) and remove radiator cover assembly (26) from radiator guard (27).
Illustration 9 g01262126
Illustration 10 g01262026
Attach Tooling (B) to radiator guard (27). Attach the other end of Tooling (B) to a suitable lifting device to tilt radiator guard (27) forward. Tilt radiator guard (27) far enough to install Tooling (C) and pins (20).Note: Second pin (20) is from the opposite side of the machine.
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Remove the engine side guards. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".
Remove the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Drain the hydraulic system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper draining procedure.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper draining procedure.
Illustration 1 g01261603
Remove bolts (1). Remove plate assembly (2).
Illustration 2 g01261607
Loosen clamp (4) and disconnect hose (3).
Loosen clamp (6) and disconnect hose (5).
Disconnect harness assemblies (7) and remove bolt (8).
Illustration 3 g01261698
Disconnect hose assembly (9).
Loosen clamp (10) and disconnect hose (11). Loosen clamp (12) and disconnect hose (13).
Loosen clamp (14) and disconnect hose (15).
Illustration 4 g01261733
Disconnect hose assemblies (16) and (17).
Remove clamp (18).
Illustration 5 g01261734
Illustration 6 g01261957
Tension the track to gain access to bolt (19). Refer to Operation and Maintenance Manual, "Track - Check/Adjust". Remove bolt (19). Use Tooling (A) to remove pin (20). Repeat for the opposite side of the machine.
Illustration 7 g01261971
Remove hose (21).
Remove hose (22).
Disconnect hoses (23) and (24).
Illustration 8 g01262125
Remove bolts (25) and remove radiator cover assembly (26) from radiator guard (27).
Illustration 9 g01262126
Illustration 10 g01262026
Attach Tooling (B) to radiator guard (27). Attach the other end of Tooling (B) to a suitable lifting device to tilt radiator guard (27) forward. Tilt radiator guard (27) far enough to install Tooling (C) and pins (20).Note: Second pin (20) is from the opposite side of the machine.
Cat SIS web machinery list:
Parts shim Caterpillar catalog:
12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H ...
924G, 924GZ, 924H, 924HZ, 924K, 926, 928F, 928G, 928H, 928HZ, 930G, 930K, 936, 938F, 938G, 938G II, 938H, 938K, CS-643, G936, IT28, IT28F, IT28G, IT38F, IT38G, IT38G II, IT38H, SH-56B
910E, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, IT12B, IT14B, IT18F, IT24F, IT28G
914G, 924G, 924GZ, 924H, 924HZ, 924K, 928G, 928H, 928HZ, 930G, 930K, 938K, IT14G, IT14G2, IT28G
525B, 525C, 535B, 535C, 545, 545C, 824K, 825K, 826K, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE, HA770, HA...
924G, 924GZ, 924H, 924HZ, 928HZ, 930G, 938K
924G, 924GZ, 924H, 924HZ, 928HZ, 930G, FUSION
938K, 950 GC, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
938K, 950 GC, 950G, 950G II, 950H, 962G, 962G II, 962H, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 972H, 972K, 972M, 972M XE
844, 844H, 844K, 854G, 854K, 982M, 986H, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 993K, 994, 994D, 994F, 994H
525D, 535D, 545D, 555D, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE,...
16G, 16H, 16H NA, 16M, 824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 980, 980B, 980C, 980F, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, AD30, R1300, R1300G, R1300G II...
1312456
SHIM PACK
45, 55
45, 55
215B, 325 L, 330, 35, 45, 55, 633E, 65C, 65E, 75C, 75D, 75E, 797, 797B, 797F, 834K, 85C, 85D, 85E, 95E, 988F, 988F II, 988K, CS-531C, CS-533C, CS-563C, CS-583C, CX35-P800, D5R LGP, D6N, D6N LGP, D6N O...
9T2581
SHIM
215B, 35, 45, 55, 633E, 65C, 65E, 75C, 75D, 75E, 797, 797B, 797F, 834K, 85C, 85D, 85E, 95E, 988F, 988F II, 988K, CX35-P800, D5R LGP, D6N, D6N LGP, D6N OEM, D7E, D7E LGP, D9T, TH31-E61, TH35-C15I, TH35...
215B, 35, 45, 55, 633E, 65C, 65E, 75C, 75D, 75E, 797, 797B, 797F, 834K, 85C, 85D, 85E, 95E, 988F, 988F II, 988K, CX35-P800, D5R LGP, D6N, D6N LGP, D6N OEM, D7E, D7E LGP, D9T, TH31-E61, TH35-C15I, TH35...
9T4569
SHIM
45, 55, 65, 65C, 75, 75C, 75D, 85C, 85D
45, 55, 65, 65C, 75, 75C, 75D, 85C, 85D
9T4568
SHIM
45, 55, 65, 65C, 75, 75C, 75D, 85C, 85D
45, 55, 65, 65C, 75, 75C, 75D, 85C, 85D
9T4567
SHIM
45, 55, 65, 65C, 75, 75C, 75D, 85C, 85D
45, 55, 65, 65C, 75, 75C, 75D, 85C, 85D
1378666
SHIM
65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E
65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E
1379444
SHIM-STRIKER PLATE
35, 45, 55
35, 45, 55
1176906
SHIM-STRIKER
35, 45, 55
35, 45, 55
1180787
SHIM-GUIDE
45, 55
45, 55
1135630
SHIM
45, 55
45, 55
6R1714
SHIM
35, 45, 55, AP-1000, AP-1000B, AP-1050, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-245C, CB-434, CP-563, CS-323C, CS-531, CS-531C, CS-533, CS-533C, CS-563C, CS-573C, CS-583, CS-583C, PM-...
35, 45, 55, AP-1000, AP-1000B, AP-1050, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-245C, CB-434, CP-563, CS-323C, CS-531, CS-531C, CS-533, CS-533C, CS-563C, CS-573C, CS-583, CS-583C, PM-...