SHIM 1307017 - Caterpillar

Illustration 1 g02797459
Table 1
Specification for 364-8537 Battery and Wiring Gp    
Item     Qty     Part     Specification description    
1     -     -     Final installation torque for the battery hold down nut is
6.8 1.4 N m (60.2 12.4 lb in).    
2     2     234-5013 Temperature Sensor Gp     Final installation torque is
20 3 N m (177 27 lb in).    
Output type is Passive.
3     1     174-7876 Horn     Use the following procedure to position the connector plug assembly of the horns:
1. Position the connector plug assembly interface below horizontal to prevent water entry.
2. Hardware can get loosened during the reorientation of the connector plug assembly. Retighten the hardware to
18 2 N m (159 18 lb in).    
4     1     174-7875 Horn     Use the following procedure to position the connector plug assembly of the horns:
1. Position the connector plug assembly interface below horizontal to prevent water entry.
2. Hardware can get loosened during the reorientation of the connector plug assembly. Retighten the hardware to
18 2 N m (159 18 lb in).    
5     1     296-5270 Pressure Sensor Gp     Final installation torque is
30 3 N m (266 27 lb in).    
Operating voltage is 5.00 0.25 VDC.
Illustration 2 g02797462
View of area A with the terminal cover removed
Table 2
6     1     8T-8549 Locknut     Torque to
70 15 N m (52 11 lb ft).    
7     1     8T-0389 Locknut     Torque to
30 6 N m (266 53 lb in).    
Illustration 3 g02797463
View of area B with the bracket assembly and terminal cover removed
Table 3
8     1     8H-5303 Nut     Torque to
23 4 N m (204 35 lb in).    
9     2     6F-7045 Full Nut     Torque to
16 2 N m (142 18 lb in).