SHIM 1403732 - Caterpillar

Illustration 1 g06078643
Table 1
Specification for 462-0506 Parking Brake Gp
Item Qty Part Specification Description
1 4 3E-4307 Locking Bolt Torque to 270 40 N m (199 30 lb ft).
2 2 8T-4244 Nut Torque to 50 10 N m (37 7 lb ft).
3 1 4K-1540 Clevis Pin Before assembly, apply Loctite C5A Copper Anti-Seize to clevis pin, lever, and rod end yoke bores.
4 - - Before you apply green Loctite 620 to parking brake plate and drive shaft bearing retainer, contact surfaces must be clean and dry.
Apply green Loctite 620 to either brake plate or bearing retainer mating surface.
Tighten bolts and remove excess sealant from joint.
Illustration 2 g06078649
Rear view
Table 2
Item Qty Part Specification Description
5 1 317-5890 Lever Minimum installed length of spline is 29.0 mm (1.14 inch).
B - - Length of the actuator shaft in the RETRACTED position is 145 mm (5.7 inch).
C - - Stroke of actuator with correctly adjusted parking brake is 20.0 to 38.0 mm (0.79 to 1.50 inch).
6 1 7F-9578 Spring Maximum free length is 92.08 mm (3.625 inch).