SHIM PACK 1489407 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7574     Link Bracket     2    Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g02545370
Disconnect hose assemblies (1), (2), (3), (4), and (5) .
Illustration 2 g01210219
Disconnect hose assemblies (6) and (7) .
Illustration 3 g02545344
Disconnect hose assemblies (8) and (9). Remove bolts (10). Disconnect harness assembly (11) .
Illustration 4 g01210264
Attach Tooling (A) and a suitable lifting device to swing motor (12). The weight of swing motor (12) is approximately 77 kg (170 lb). Remove bolts (13). Remove swing motor (12) .