SHIM PACK 2465249 - Caterpillar

Illustration 1 g06334239
(A) 387-6582 Rocker SwitchThe rocker switch (A) will need to be installed in the location as shown in Illustration 1. Refer to the following steps to install the Autoshift SEA.Software Installation Procedure
Illustration 2 g06334241
Cat® ET window
(B) Configuration tab
(C) Transmission configuration
(D) Installation status
(E) Change button
Within Cat® ET, click on the configuration tab (B). Then click on the transmission configuration (C). Then click the installation status (D) where it says, "Not Installed". Finally, click the change button (E).
Illustration 3 g06334242
Change parameter value window
Change the selection from "Not Installed" to "Installed".
Illustration 4 g06334245
Factory passwords window
Click on the link shown, to obtain the factory password.
Illustration 5 g06334246
Factory passwords window
Once the factory password has been obtained from the web link, that will be filled automatically in Cat® ET. Then click "OK".
Illustration 6 g06334247
Cat® ET window
Autoshift feature has been installed.Compatibility: All Cat® 420 F2 series center pivot backhoe loaders sold into the North America region (U.S and Canada) starting in July 2018 production. The powershift transmissions will not be available for 2WD equipped versions of 420F2 ( (S/N: LYB)/ (S/N: LYC) prefix), 415F2 IL, 415F2, 416F2, 430F2, and 450F machines.