SHIM 3026336 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - LOCTITE 5900 Flange Sealant 1
If necessary remove the rails and position the engine onto a suitable engine stand.
Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the proper draining and filling procedures.
Illustration 1 g02694441
Illustration 2 g02694446
Remove oil gauge (1) and brackets (4).
Use a suitable lifting device or stand to support oil pan (3). The weight of oil pan (3) is approximately 185 kg (408 lb).
Remove bolts (2) and remove oil pan (3).
Illustration 3 g02694496
Engine is shown upside down.
Remove screen and suction bell assembly (5).
Remove tube assemblies (6) and the O-ring seals. Remove engine oil pump (7).
Illustration 4 g02694556
Remove gasket (8) from oil pan (3). Discard gasket (8). Installation Procedure
Install oil pan (3) in the reverse order of removal.
Illustration 5 g02694579
Apply Tooling (A) to Locations (X). Make sure to spread an even layer across the entire abutment and fill in any gaps with the tooling.
Install new gasket (8). Apply Tooling (A) to Locations (X) with the gasket in place.
Apply clean engine oil to the O-ring seals of tube assemblies (6)