3212911 SHIM Caterpillar parts
1390, 2590, 541, 541 2, 551, 552, 552 2
Rating:
Alternative (cross code) number:
CA3212911
321-2911
3212911
CA3212911
321-2911
3212911
Weight: 0.38 pounds 0 kg.
TRACK FELLER BUNCHER,
Compatible equipment models: 3212911:
Number on catalog scheme:
24
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacturer (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacturer (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Caterpillar parts catalog:
Parts shim Caterpillar catalog:
1090, 1190, 1190T, 1290T, 1390, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 246C, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 262C, 267, 267B, 268B, 272C, 277C, 287, 287C, 29...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 311, 311B, 312, 312B, 313B, 320 L, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320D, 320E LN, 320N, 321D LCR, 322, 322 FM L, 322 L, 322 LN, 3...
1390, 2590, 315, 315B L, 317, 317B LN, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320D, 320E LN, 320N, 321D LCR, 322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323E L, 3...
1390, 2590, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 317, 317B LN, 318B, 318C, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307, 307B, 307C, 308C, 308E SR, 320C, 322, 322 FM L, 322B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 3...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307, 307B, 307C, 308C, 308E SR, 320C, 322, 322 FM L, 322B, 322B L, 322B LN, 322C, 322C FM, 324D FM, 324D L, 325, 325 FM L, 325 L, 325 LN, ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307, 307B, 307C, 320C, 322, 322 FM L, 325, 325 FM L, 325 L, 325 LN, 325B L, 325C, 325C FM, 325C L, 325D FM, 325D FM LL, 325D MH, 330, 330 ...
1249858
SHIM
320C, 320D FM, 543, 551, 552, 552 2, 583T, 587R, 587T, 621F, 621G, 627F, 627G, 914G, 953D, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, HF181, HF201, HF201B, HF202, HF221, HF222, IT14G, M315, M315C, M315D, M...
320C, 320D FM, 543, 551, 552, 552 2, 583T, 587R, 587T, 621F, 621G, 627F, 627G, 914G, 953D, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, HF181, HF201, HF201B, HF202, HF221, HF222, IT14G, M315, M315C, M315D, M...
2705229
SHIM
525C, 535C, 545C
525C, 535C, 545C
2645279
SHIM
525C, 525D, 535C, 535D, 545C, 545D, 555D
525C, 525D, 535C, 535D, 545C, 545D, 555D
3576992
SHIM PACK
525C, 525D, 535C, 535D, 545C, 545D, 555D
525C, 525D, 535C, 535D, 545C, 545D, 555D
3235950
SHIM PACK
525C, 535C, 545C
525C, 535C, 545C
324D L, 325D L, 328D LCR, 329D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LN, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, ...
324D L, 325D L, 328D LCR, 329D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LN, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, ...
2896562
SHIM
320D, 320D FM
320D, 320D FM
3558297
SHIM
321D LCR, 324E LN, 329D LN
321D LCR, 324E LN, 329D LN
3558296
SHIM
321D LCR, 324E LN, 329D LN
321D LCR, 324E LN, 329D LN
3558295
SHIM
321D LCR, 324E LN, 329D LN
321D LCR, 324E LN, 329D LN
3724360
SHIM
320D FM, HH44 DE, SAT223, SAT318T, SAT322
320D FM, HH44 DE, SAT223, SAT318T, SAT322
3516974
SHIM PACK
320D FM, 584, HH44 DE
320D FM, 584, HH44 DE