SHIM 4402139 - Caterpillar

Illustration 10 g01421900
Disconnect hose assemblies (11) and (12) .
Illustration 11 g01418072
Disconnect hose assemblies (13), (14), (15), and (16) .
Illustration 12 g01418073
Open door (17) that is located on the right side of the cab.
Illustration 13 g01418074
Disconnect cable assembly (18) for the rear camera. Cut all necessary cable straps.
Illustration 14 g01418076
Disconnect ground strap (19) .
Illustration 15 g01418077
Disconnect pin (22) from the end of parking brake cable (20). Loosen nut (21) and position parking brake cable (20) to the side.
Illustration 16 g01418078
View of the bottom right side of the cab
Disconnect pilot hose assemblies (23) .
Illustration 17 g01418099
Illustration 18 g01418127
Disconnect pilot hose assemblies (24) and harness assemblies (25) that are located under the left side of the cab.
Illustration 19 g01418097
Remove floor mat (26) .
Illustration 20 g01418130
Remove cover (27) .
Illustration 21 g01418133
Remove bolts (28) .
Illustration 22 g01418148
Remove bolts (29) .
Illustration 23 g01418149
Attach Tooling (B) and a suitable lifting device to cab (30). The weight of cab (30) is approximately 5307 kg (11700 lb).
Illustration 24 g01418150
Remove mounting bolts (31) for the ROPS.
Illustration 25 g01418149
Remove cab (30) .