SHIM PACK 4E8162 - Caterpillar

Connect the 133-9992 Harness (7) to the two 105-8034 Limit Switches . Refer to Illustration 4.
Illustration 5 g00654856
Refer to Table 2 for the connections to each pin.
Connect the 133-9992 Harness (7) to the 133-9993 Harness (8) according to Table 2. Also refer to Illustration 5.
Table 2
Harness Connections    
Pin     Termination    
133-9992 Harness (7)    
AA     Right hand limit switch (2)    
BB    
CC     Left hand limit switch (2)    
DD    
EE     The harness connector which was disconnected from the stabilizer switch    
FF    
GG     Pin JJ on 133-9993 Harness (8)    
HH     Pin KK on 133-9993 Harness (8)    
133-9993 Harness (8)    
JJ     Pin GG on 133-9992 Harness (7)    
KK     Pin HH on 133-9992 Harness (7)    
LL     NN on 133-9994 Harness (9)    
MM     PP on 133-9994 Harness (9)    
133-9994 Harness (9)    
NN     Pin LL on the 133-9993 Harness (8)    
PP     Pin MM on the 133-9993 Harness (8)    
QQ     3E-9362 Relay (16)    
RR    
SS    
TT    
UU (brown wire)     Spare cavity in the fuse block    
VV (black wire)     Ground on the tachometer gauge    
Connect the 133-9993 Harness (8) to the 133-9994 Harness (9) according to Table 2. Also refer to Illustration 5.
Route the new harnesses along the existing cables which lead to the right hand control panel. Secure the harnesses to the existing cables with the 3S-2093 Cable Straps (10). Refer to Illustration 4.
Remove the right hand control panel (F) from the right hand console. Refer to Illustration 4.
Replace the existing horn with the 136-5185 Horn (11). Refer to View E-E in Illustration 4.
Behind the control panel, install a 134-0241 Plate (12). Secure the plate to the control panel with a 8T-6693 Screw (13), a 5C-2874 Nut (14), and a 9F-8125 Lockwasher (15). Refer to View E-E in Illustration 4.
Install the plug which holds pins QQ, RR, SS, and TT to the 134-0241 Plate (12). Refer to View E-E in Illustration 4.
Install the 3E-9362 Relay (16) on the plug which holds pin QQ, RR, SS, and TT. Refer to View E-E in Illustration 4.
Attach connection (VV) of the 133-9994 Harness (9) to the ground terminal of the tachometer gauge (G). Refer to Table 5. Also refer to Illustrations 4 and 5.
Attach connection (UU) of the 133-9994 Harness (9) to the spare cavity in the fuse block (H). Refer to Table 5. Also refer to Illustrations 4 and 5.
Install the 9W-1442 Fuse (17) in the fuse block. Refer to View E-E in Illustration 4.
Connect the right hand control panel to the right hand console.
Connect the battery to the electrical system.
Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury