SHIM 5356337 - Caterpillar

Illustration 1 g00413691
Torque for two studs in the case and frame ... 30 5 N m (22 4 lb ft) (1) Apply 6V-6640 Sealant to the bore for the seal and the bore for the plug. Install the plug to the following depth. ... 1.25 0.25 mm (0.05 0.010 inch) (2) Lubricate the lip of the seal with SAE 30W oil. (3) Torque for four bolts that hold the cage to the cover ... 30 4 N m (22 3 lb ft)Note: Lubricate the pump with oil before operation. The pump must turn freely before installation and after installation. Assemble the pump to the case of the case and frame.
Illustration 2 g00413694
Table 1
Section (1)    A    B    C    
Function     Torque Converter and Lubrication     Transmission and Controls     Transmission Scavenge Section    
Output    
135 L/min (35 US gpm)    
50 L/min (13.21 US gpm)    
102 L/min (26.95 US gpm)    
RPM     1800     1800     900    
Pressure    
1035 kPa (150 psi)    
2760 kPa (400 psi)    
70 kPa (10 psi)    
( 1 ) Rotation is counterclockwise in all sections. (4) Clearance is between the gears and the cover. Section (C) is the original dimension. ... 0.104 0.043 mm (0.0041 0.0017 inch) (5) Clearance is between the gears and the body. Section (B) is the original dimension. ... 0.104 0.043 mm (0.0041 0.0017 inch) (6) Clearance is between the gears and the cover. Section (A) is the original dimension. ... 0.107 0.021 mm (0.0042 0.0008 inch) (7) Original diameter of the shafts ... 31.742 0.005 mm (1.2497 0.0002 inch) (8) Original bore of the bearings ... 31.786 0.008 mm (1.2514 0.0003 inch)