SHIM 5N1902 - Caterpillar

Removal Procedure
Start by:a. Release the hydraulic system pressure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06011489
Remove knobs (2) and screws (1).
Illustration 2 g06011490
Remove cover (4) and arm rest assembly (3).
Illustration 3 g06011492
Remove screw (6), rod (5), and knob (7).
Illustration 4 g06011496
Remove screws (9) and (10). Remove cover (8).
Illustration 5 g06011497
Remove screws (11) and lever (12).
Illustration 6 g06011503
Disconnect cable assembly (13). Remove screws (14) and cover (15).
Illustration 7 g06011504
Remove straps (16) and disconnect harness assemblies (17).
Illustration 8 g06011505
Disconnect hose assemblies (18).
Illustration 9 g06011510
Remove screws (19) and cover (20).
Illustration 10 g06011512
Remove screws (21) and cover (22).
Illustration 11 g06011513
Remove bolts (24) and control lever assembly (23).
Illustration 12 g06011514
Remove locknut 25 and base plate (26).
Illustration 13 g06011516
Remove nut (28), bolt (29), and (30). Remove STIC control lever assembly (31) and STIC control valve assembly (27).Installation Procedure
Install STIC control valve assembly (27) in the reverse order of removal.
Tighten screws (24), (21), (19), (9), and (1) to a torque of 6 1 N m (53 9 lb in).
Install knob (6) and tighten the locknut to torque of 8.5 1.3 N m (75.23138 11.50598 lb in)
Tighten locknut (25) to a torque of 25 5 N m (221 44 lb in).