SHIM GP-FUEL INJECTION PUMP 5Y1345 - Caterpillar

Removal Procedure
Note: The governor and the fuel transfer pump have been removed from the engine for photographic purposes only. This procedure may be done with the governor on the engine.
Illustration 1 g00623633
Illustration 2 g00623671
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Hold cover (1) in place and remove bolts (2) in order to release the spring beneath cover (1). Remove cover (1).
Illustration 3 g00623686
Remove fitting (3) and the check valve from cover (1). Remove the filter screen (if equipped) from fitting (3).
Illustration 4 g00623687
Remove spring (4) and piston (5).
Remove upper O-ring seal (6).
Illustration 5 g00623714
Remove sleeve assembly (7). Inspect the face of lifter (8) for excessive wear. Inspect the surface of the camshaft that is inside of the governor for excessive wear or damage.
Remove lower O-ring seal (9).
Illustration 6 g00623719
Remove fitting (10) and the check valve. Note: For information on reusability of the components in the fuel transfer pump, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8434, "3100 Governor Inspection and General Information for Mechanical Governor Groups Used in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI)".