6D6189 SHIM (.010" Thick) Caterpillar parts
14E, 215, 215B, 215C, 215D, 225, 931B, 933, 935B, 935C, 939, D3B, D3C II, D3C III, D4C III, D5C III
Rating:
Alternative (cross code) number:
CA6D6189
6D-6189
6D6189
CA6D6189
6D-6189
6D6189
![Caterpillar 6D6189 SHIM (.010" Thick)](https://storage.googleapis.com/a2109_c1_300/p/caterpillar/shim/6d6189.png "Caterpillar 6D6189 SHIM (.010" Thick) parts catalog")
Weight: 0.01 pounds 0 kg.
Information:
ID
26.187
mm
OD
42.926
mm
THICKNESS
.254
mm
EXCAVATOR, TRACK-TYPE TRACTOR,
Compatible equipment models: 6D6189:
Number on catalog scheme:
None
For full view, you need register
Information:
Cylinder Head Bolt Torque Information
All 1100, 3100 and earlier 3200 Series Engines used cylinder head bolts with a torque specification of 130 N m (95 lb ft).
These earlier head bolts can be identified by six dash marks on the bolt head. See Illustration 1.
Later 3204 and 3208 Engines use stronger cylinder head bolts with a higher torque specification. These bolts can be identified by seven dash marks on the bolt head. See Illustration 1.
The higher cylinder head bolt torque may be used on earlier engines ONLY if the bolts are replaced with the later higher strength bolts (seven dash marks on the bolt head). If the earlier bolts are tightened to the later torque specification, they may yield (stretch) and lose their clamping force.
Illustration 1. Bolt Head Identification.Before installing the cylinder head bolts put engine oil on the threads. Tighten the bolts as shown in Illustration 2 and the Head Bolt Chart.
Illustration 2. Cylinder Head Bolt Tightening Sequence.
All 1100, 3100 and earlier 3200 Series Engines used cylinder head bolts with a torque specification of 130 N m (95 lb ft).
These earlier head bolts can be identified by six dash marks on the bolt head. See Illustration 1.
Later 3204 and 3208 Engines use stronger cylinder head bolts with a higher torque specification. These bolts can be identified by seven dash marks on the bolt head. See Illustration 1.
The higher cylinder head bolt torque may be used on earlier engines ONLY if the bolts are replaced with the later higher strength bolts (seven dash marks on the bolt head). If the earlier bolts are tightened to the later torque specification, they may yield (stretch) and lose their clamping force.
Illustration 1. Bolt Head Identification.Before installing the cylinder head bolts put engine oil on the threads. Tighten the bolts as shown in Illustration 2 and the Head Bolt Chart.
Illustration 2. Cylinder Head Bolt Tightening Sequence.
Cat SIS web machinery list:
Parts shim Caterpillar catalog:
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120, 120B, 12E, 12F, 140, 140B, 14E
120, 12E, 12F, 14E
120B, 12E, 12F, 140B, 14E
120B, 12E, 12F, 140B, 14E
120, 120B, 12E, 140, 140B, 14E
120, 120B, 12E, 140, 140B, 14E
120, 120B, 12E, 140, 140B, 14E
120B, 12F, 140B, 14E
8J1864
SHIM
225, 227, 235, 235B, 245, R2900, R2900G, R3000H
225, 227, 235, 235B, 245, R2900, R2900G, R3000H
173B, 183B, 245, 518, 528, 54, 613B, 613C, 615, 615C, 621B, 630B, 631D, 631E, 631G, 637E, 637G, 651, 651E, 657E, 657G, 815B, 826C, 930, 941, 950F, 950F II, 953, 953C, 955H, 963, 963B, 963C, 966D, 966F...
1183836
SHIM
315B, 933, 933C, D3C III, D4C III, D5C III
315B, 933, 933C, D3C III, D4C III, D5C III
1183835
SHIM
315B, 933, 933C, D3C III, D4C III, D5C III
315B, 933, 933C, D3C III, D4C III, D5C III
1183834
SHIM
315B, 933, 933C, D3C III, D4C III, D5C III
315B, 933, 933C, D3C III, D4C III, D5C III
1183833
SHIM
315B, 933, 933C, D3C III, D4C III, D5C III
315B, 933, 933C, D3C III, D4C III, D5C III
8J2069
SHIM (.005" Thick)
14G, 16G, 225, 227, 235D, 245, 245B, 245D, 943
14G, 16G, 225, 227, 235D, 245, 245B, 245D, 943
8J2068
SHIM (.002" Thick)
14G, 16G, 225, 227, 235D, 245, 245B, 245D, 943
14G, 16G, 225, 227, 235D, 245, 245B, 245D, 943
215, 225, 227, 229, 229D, 231D, 235, 235B, 235C, 235D
4B9605
SHIM
225, 227, 235, 235B, 245
225, 227, 235, 235B, 245