SHIM (.065" THICK) 6K8744 - Caterpillar

6K8744 SHIM (.065" THICK) Caterpillar parts D4D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6K8744
6K-8744
6K8744

Weight: 12 pounds 5 kg.

Buy SHIM (.065" THICK) 6K8744 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 6K8744:

TRACK-TYPE TRACTOR D4D Caterpillar

Number on catalog scheme: None

Caterpillar 6K8744 Parts scheme SHIM (.065" THICK)

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-0914(1) Guide Pin 2
(1) Part of 9U-5105 Engine Tool GroupStart By:
Remove the crankshaft rear seal.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01294603
Install Tooling (A) in the rear of the crankshaft.
Attach a suitable lifting device to crankshaft rear gear (1). The weight of crankshaft rear gear (1) is approximately 65 kg (143 lb). Slide crankshaft rear gear (1) onto Tooling (A). Remove crankshaft rear gear (1).
Remove the O-ring seals from each side of crankshaft rear gear (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install crankshaft rear gear (1) in the reverse order of removal.
Align the four unevenly spaced holes in crankshaft rear gear (1) with the four threaded holes in the crankshaft.
Install crankshaft rear gear (1) on Tooling (A) with the gear teeth away from the crankshaft.