SHIM PACK 7D2878 - Caterpillar

Illustration 1 g03071616
Table 1
Specification for 1W-2135 Governor Drive Gp
Item Qty Part Specification Description
2 1 7N-5701 Governor Drive Pinion Diameter (C) is 34.000 0.013 mm (1.3386 0.0005 inch).
Use the 7N-5694 Shim (1) to achieve the assembled backlash of the governor drive pinion is 0.075 to 0.150 mm (0.0030 to 0.0059 inch).
3 2 0S-1621 Bolt Do not tighten the bolt until governor is aligned vertically.
4 1 8C-5197 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
5 2 1D-4588 Bolt Lubricate the bore lightly with the lubricant that is being sealed.
6 1 1N-3409 Bevel Gear Diameter (E) is 34.000 0.013 mm (1.3386 0.0005 inch).
Dimensions for the sleeve bearing (F):
Outside diameter of the sleeve bearing is 40.545 0.013 mm (1.5963 0.0005 inch).
Bore in the sleeve bearing after installation is 34.072 mm (1.3414 inch).
Bore diameter of drive housing (D) is 40.432 0.025 mm (1.5918 0.0010 inch).
7 1 7N-5700 Adapter Bore diameter (A) is 34.072 0.025 mm (1.3414 0.0010 inch).
8 1 6V-8260 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
9 1 6J-2244 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
10 1 061-9457 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
11 2 1A-7669 Bolt Do not tighten the bolt until governor is aligned vertically.
12 2 6V-3348 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
13 1 6V-5048 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.