8K1727 SHIM PACK .088in.(2.24mm)thick Caterpillar parts
225, 227, 229, 229D, 235, 235B, 235C, 235D, 245, 245B, 245D
Rating:
Alternative (cross code) number:
CA8K1727
8K-1727
8K1727
CA8K1727
8K-1727
8K1727
Weight: 0.50 pounds 0 kg.
EXCAVATOR, LOGGER,
Compatible equipment models: 8K1727:
Number on catalog scheme:
20
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 227-4390 E12 Torx Socket 1 Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: The crankshaft rear seal and the housing are manufactured as a one-piece assembly. The assembly is not serviceable. If the crankshaft rear seal is removed, the assembly must be replaced.
Illustration 1 g01269512
Typical example
Use Tooling (A) in order to remove torx screws (1) from crankshaft rear seal (2) .
Remove crankshaft rear seal (2) from the cylinder block. Discard the crankshaft rear seal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 227-4390 E12 Torx Socket 1 Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: The crankshaft rear seal and the housing are manufactured as a one-piece assembly. The assembly is not serviceable. If the crankshaft rear seal is removed, the assembly must be replaced.
Illustration 1 g01269512
Typical example
Use Tooling (A) in order to remove torx screws (1) from crankshaft rear seal (2) .
Remove crankshaft rear seal (2) from the cylinder block. Discard the crankshaft rear seal.
Cat SIS web machinery list:
Parts shim Caterpillar catalog:
215, 215B, 219D, 235, 235B, 245, 920, 930, 930R, 941, 951B, 955K, 955L, 977K, 983, 992, D397D, D6C
120G, 12G, 130G, 140G, 14G, 160G, 215, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 517, 527, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633E II, 637E, 63...
215, 245, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 32...
120G, 12F, 12G, 130G, 140, 14E, 14G, 16, 163, 16G, 173B, 183, 183B, 191, 215, 225, 235, 235D, 245, 245B, 46, 525B, 535B, 545, 561C, 621, 621B, 621E, 621F, 623, 623B, 623E, 627B, 627E, 627F, 631C, 631E...
14G, 16G, 215, 225, 235D, 245, 245B, 245D, 941, 950, 977K, 977L, 980B, 988, 988B, 992C, 994
12E, 140, 225, 245, 325 L, 41, 518, 518C, 528, 528B, 530B, 613, 613B, 613C, 613C II, 615, 615C, 621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623B, 623E, 623F, 623G, 623H, 627, 627B, 627E, 627F, 627G,...
225, 735, 740, 943, 953, 953C, 963, 963B, 963C, 973, 973C, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
8K3568
SHIM
235, 235C
235, 235C
8K3944
SHIM
225
225
8K1957
SHIM PACK
235, 235B, 235C, 235D, 245, 245B
235, 235B, 235C, 235D, 245, 245B
120G, 12F, 12G, 130G, 140, 14E, 14G, 16, 163, 16G, 173B, 183, 183B, 191, 215, 225, 235, 235D, 245, 245B, 46, 525B, 535B, 545, 561C, 621, 621B, 621E, 621F, 623, 623B, 623E, 627B, 627E, 627F, 631C, 631E...
9J8782
SHIM .007 in.(.18 mm) thick
215, 225, 227, 235, 235B, 245, 589
215, 225, 227, 235, 235B, 245, 589
9J8784
SHIM .007 in.(.18 mm) thick
225, 227, 235, 235B, 245, R2900, R2900G, R3000H
225, 227, 235, 235B, 245, R2900, R2900G, R3000H
14G, 16G, 215, 225, 235D, 245, 245B, 245D, 941, 950, 977K, 977L, 980B, 988, 988B, 992C, 994
231D, 235, 235D, 245, 943, 953, 953B, 963, 963B, 973
6J6856
SHIM (.031 in. thick)
14E, 215, 225, 245
14E, 215, 225, 245
225, 227, 229, 229D, 235, 235B, 235C