9F0263 SHIM Caterpillar parts
Rating:
Alternative (cross code) number:
CA9F0263
9F-0263
9F0263
CA9F0263
9F-0263
9F0263
Weight: 60 pounds 27 kg.
Information:
Removal Procedure
Start By:
Purge the air system pressure. Refer to Disassembly and Assembly, "Air System Pressure - Purge".Note: Install caps and plugs on all openings in order to prevent dirt or debris from entering the system. Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Turn the battery disconnect switch to the OFF position. Open the door assembly to the lubrication pump on the left side of the platform.
Illustration 1 g01432570
Disconnect harness assemblies (1) and (2) .
Illustration 2 g01432586
Remove clips (3) and (4) from tube assembly (5). Remove tube assembly (5) from the check valve. Disconnect hose assembly (6) .
Illustration 3 g01432595
Disconnect tee (7). Remove bolt (8) and angle (9). Remove clip (10) .
Illustration 4 g01432601
Disconnect hose assembly (11) from solenoid valve (12). Remove clip (13) .
Illustration 5 g01432636
Attach a suitable lifting device to lubrication pump (14). The weight of lubrication pump (14) is approximately 29 kg (64 lb).
Remove bolts (15) that secure lubrication pump (14) .
Remove lubrication pump (14) .
Start By:
Purge the air system pressure. Refer to Disassembly and Assembly, "Air System Pressure - Purge".Note: Install caps and plugs on all openings in order to prevent dirt or debris from entering the system. Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Turn the battery disconnect switch to the OFF position. Open the door assembly to the lubrication pump on the left side of the platform.
Illustration 1 g01432570
Disconnect harness assemblies (1) and (2) .
Illustration 2 g01432586
Remove clips (3) and (4) from tube assembly (5). Remove tube assembly (5) from the check valve. Disconnect hose assembly (6) .
Illustration 3 g01432595
Disconnect tee (7). Remove bolt (8) and angle (9). Remove clip (10) .
Illustration 4 g01432601
Disconnect hose assembly (11) from solenoid valve (12). Remove clip (13) .
Illustration 5 g01432636
Attach a suitable lifting device to lubrication pump (14). The weight of lubrication pump (14) is approximately 29 kg (64 lb).
Remove bolts (15) that secure lubrication pump (14) .
Remove lubrication pump (14) .
Parts shim Caterpillar catalog:
9C2796
SHIM
Caterpillar
Caterpillar
9B4277
SHIM
Caterpillar
Caterpillar
8Z7333
SHIM
Caterpillar
Caterpillar
8Z1862
SHIM
Caterpillar
Caterpillar
8U9446
SHIM 2.45 MM
Caterpillar
Caterpillar
8U9445
SHIM 2.40 MM
Caterpillar
Caterpillar
9F2203
SHIM
Caterpillar
Caterpillar
9F2202
SHIM
Caterpillar
Caterpillar
9F2201
SHIM
Caterpillar
Caterpillar
9F2200
SHIM
Caterpillar
Caterpillar
9F1377
SHIM-REAR
Caterpillar
Caterpillar
9F1011
SHIM-GENERATOR
Caterpillar
Caterpillar