AVSPARE.COM
parts catalog

SHIM, .007" B138135 - Caterpillar



B138135 SHIM, .007" Caterpillar parts PS-110, PS-130, PS-180 SHIM
Rating:
11
Alternative (cross code) number:
CAB138135
B13-8135
B138135
Caterpillar B138135 SHIM, .007"

Buy SHIM, .007" B138135 Caterpillar genuine, new aftermarket tractor parts with delivery
PNEUMATIC COMPACTOR,

Compatible equipment models: B138135:

PNEUMATIC COMPACTOR  PS-110   PS-130   PS-180   Caterpillar
Number on catalog scheme: 3
 
  For full view, you need register

Information:

Parameter Descriptions
"Equipment ID"
The "Equipment ID" parameter allows the customer to enter a description into the ECM in order to identify the machine. A maximum of 17 characters can be entered in the field."Engine Serial Number"
The "Engine Serial Number" should be programmed to match the engine serial number that is stamped on the engine information plate. The engine serial number is not preprogrammed on a replacement ECM."FLS" (Full Load Setting)
"FLS" is a number that represents the adjustment to the fuel system that was made at the factory in order to fine tune the fuel system. The correct value for this parameter is stamped on the engine information plate. Change this value only if the engine is rerated or if a new ECM is installed. Factory passwords are required."FTS" (Full Torque Setting)
"FTS" is similar to "FLS". Change this value only if the engine is rerated or if a new ECM is installed. Factory passwords are required."Security System Immobilizer Installation Status"
This parameter allows the Machine Security System (MSS) to be disabled or removed. If the MSS is removed from the machine and this parameter is not programmed to "Not Installed", the engine will not start. Factory passwords are required."Engine Oil Weight"
Setting this parameter to the correct oil grade that is in the engine will aid in cold weather starting. Do not program this parameter to "Automatic Detection".Parameter Table
Table 1
System Configuration Parameters    
Parameter    Available Range or Options    Default    Required Password    
"Equipment ID"     17 characters     blank     none    
"Engine Serial Number"     8 characters     blank     none    
"FLS"     -128 to +127     0     Factory    
"FTS"     -128 to +127     0     Factory    
"Security System Immobilizer Status"     "Installed" or "Not Installed"     Hardware Dependent (1)     Factory    
"Engine Oil Weight"     "0W20 oil grade"
"10W30 oil grade"
"15W40 oil grade"     "Automatic Detection"     none    
( 1 ) If the machine is equipped with MSS, the default installation status will be "Installed". If the machine is not equipped with MSS, the default installation status will be "Unavailable".Parameter Worksheet
Record the following information before you change any programmable parameter.
Table 2
Information from ECM    
"Equipment ID"    
   
"Engine Serial Number"    
   
"ECM Serial Number"    
   
"Personality Module Part Number"    
   
"Personality Module Release Date"    
   
"Personality Module Description"    
   
"FLS"    
   
"FTS"    
   
"Security System Immobilizer Status"    
   
"Engine Oil Weight"    
   
"Total Tattletale"    
   
Information From Engine Information Plate    
Engine Serial Number    
   
Full Load Setting
(for new ECM)    
   
Full Torque Setting
(for new ECM)    
   Note: Compare the FLS and the FTS from the ECM with the values that are listed on the engine information plate. Change this value only if the engine is rerated or if a new ECM is installed. The use of the wrong parameters could cause damage to the engine. The use of the wrong parameters may also void the Caterpillar warranty.

Caterpillar parts catalog:

Caterpillar parts catalog
PS-180 PNEUMATIC COMPACTOR 7PD00045-UP (MACHINE) POWERED BY 4.236 ENGINE
PS-110 PNEUMATIC COMPACTOR 7MD00051-UP (MACHINE) POWERED BY 4.236 ENGINE
PS-130 PNEUMATIC COMPACTOR 7ND00121-UP (MACHINE)
PS-130 PNEUMATIC COMPACTOR 7ND00001-00120 (MACHINE)
PS-180 PNEUMATIC COMPACTOR 7PD00001-00044 (MACHINE)


Parts shim Caterpillar catalog:

0307028 SHIM
206, 212, 214, 224, AP-800, CB-424, CS-431B, PS-110
B141407 SHIM
PS-110, PS-130, PS-180
B138134 SHIM, .020"
PS-110, PS-130, PS-180
A079264 SHIM, #16 GA.
PS-110, PS-130, PS-180
A079263 SHIM, .030"
PS-110, PS-130, PS-180
B141407 SHIM
PS-110, PS-130, PS-180
E820041 SHIM, .020"
PS-110, PS-130, PS-180
E820040 SHIM, .007"
PS-110, PS-130, PS-180
A079263 SHIM, .030"
PS-110, PS-130, PS-180
A079264 SHIM, #16 GA.
PS-110, PS-130, PS-180
B138134 SHIM, .020"
PS-110, PS-130, PS-180
B138136 SHIM, .005"
PS-110, PS-130, PS-180
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.