SHOE 0931941 - Caterpillar

Illustration 1 g00280782
Components for the Caterpillar Electronic Technician (ET) (1) IBM-compatible personal computer (2) 139-4166 Data Link Cable or 7X-1570 Data Link Cable (3) 7X-1425 Cable and 4C-6805 Adapter (4) Special Publication, NEXG4523, "Caterpillar Electronic Technician Software" (5) 7X-1700 Communication Adapter Tool The Caterpillar Electronic Technician (ET) is a software program that can be used on an IBM-compatible personal computer.Reference: To use the Caterpillar ET, order Special Publication, JERD2124, "ET Single Use Program License", Special Publication, JEHP1026, "Information and Requirements Sheet", and Special Publication, JERD2129, "Data Subscription". The Special Publication, JEHP1026, "Information and Requirements Sheet" lists the required hardware and the features of CAT ET.The Caterpillar Electronic Technician (ET) is not needed for determining diagnostic codes or for clearing diagnostic codes, but using the ET is a faster, easier method. The ET can also display information about past history of diagnostic codes and information about the parameter status. Because of these features, the ET is a useful service tool for troubleshooting.The Caterpillar Electronic Technician (ET) connects to the machine service connector. The machine service connector is a nine-pin connector. The machine service connector is located on the left side of the front dash below the steering column. The Caterpillar Electronic Technician (ET) communicates with the Electronic Control Modules (ECM) via the Caterpillar Data Link. Connect Caterpillar Electronic Technician (ET) to the machine and start the ET. The ET will initiate communication with the Electronic Control Modules (ECM) on the machine. After communication has been established, the ET will list the Electronic Control Modules (ECM) that are on the machine. Choose the menu item "Transmission" for the machine that is being serviced. After the diagnostic codes have been determined with the ET, see the test procedure for the corresponding diagnostic code.Reference: For more information, refer to the Service Manual module Testing and Adjusting, "Electrical Components and Connector Locations" for the machine that is being serviced.Reference: For more information about the electrical system and the electrical components of the 545 Wheel Skidder, refer to the Service Manual module Schematic, "545 Wheel Skidder Electrical System".Reference: For more information about the electrical system and the electrical components of the 525B Wheel Skidder and the 535B Wheel Skidder, refer to the Service Manual module Schematic, "525B Wheel Skidder and 535B Wheel Skidder Electrical System".