AVSPARE.COM
parts catalog

SHOE - TRACK 1061605 - Caterpillar


1061605 SHOE - TRACK Caterpillar parts D5H, D6M, D6N
Rating:
70
Alternative (cross code) number:
CA1061605
106-1605
1061605
Caterpillar 1061605 SHOE - TRACK
Weight: 54 pounds 24 kg.
Information:
BOLT HOLE SIZE  20.37  mm
BOLT HOLE SPACING A  24  mm
BOLT HOLE SPACING B  120.84  mm
BOLT HOLE SPACING C  68  mm
BOLT HOLE SPACING D  41.5  mm
PITCH  190  mm
WIDTH  860  mm

Buy SHOE - TRACK 1061605 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$620.12

30 Jun 2025

US: SupplyMount
Conbraco Industries, Inc. 1061605 1.25 x 1.5 30# ASME HWRV 3,030,000btu
Conbraco
$666.38

05 Jun 2025

US: SupplyMount
Conbraco Industries, Inc. 1061605 1.25 x 1.5 30# ASME HWRV 3,030,000btu
Conbraco
$573.95

05 Jun 2025

US: Autoplicity ✅
Apollo Valve 10-600 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 1-1/4" x 1-1/2" NPT Female
APOLLO Relief pressure preset of 30 psi for releasing excess pressure || 1-1/4" female NPT threaded inlet for connecting to a male NPT threaded connection || Bronze body and spring cage for corrosion resistance || 250 degrees F maximum temperature for use in high-temperature applications || ASME safety rated for Section IV heating boilers
  For full view, you need register

Compatible equipment models: 1061605:

TRACK-TYPE TRACTOR  D5H   D6M   D6N   Caterpillar

Information:


Illustration 1 g00573335
(1) Governor's gear shaft Diameter of gear shaft for mounting the gear ... 27.560 0.010 mm (1.0850 0.0003 inch) Bore in gear for shaft ... 27.520 0.010 mm (1.0834 0.0004 inch) (2) Press the gear against the shoulder of the governor's gear shaft. (3) SealLubricate the bore for the seal lightly with engine oil. (4) Bearing in housing Bore in the bearing for the governor's gear shaft after installation ... 25.044 0.020 mm (0.9859 0.0010 inch) Diameter of governor shaft in bearing ... 24.909 0.013 mm (0.9807 0.0005 inch) (5) Thrust washer Thickness of new thrust washer ... 5.000 0.080 mm (0.1969 0.0030 inch) Width of groove in governor's gear shaft for the thrust washer ... 5.25 0.08 mm (0.207 0.003 inch)
Illustration 2 g00573392
(6) Press the bearing for the pinion gear until the bearing is flush with the top of the counterbore in the housing. Bore in bearing after installation ... 25.044 0.020 mm (0.9860 0.0010 inch) Diameter of new pinion gear shaft at bearing ... 24.925 0.010 mm (0.9813 0.0004 inch) (7) Thrust washer Thickness of new thrust washer ... 5.00 0.08 mm (0.200 0.003 inch) Width of groove in pinion's shaft for the thrust washer ... 5.25 0.08 mm (0.207 0.003 inch)

Caterpillar parts catalog:

Caterpillar parts catalog
D6M TRACK-TYPE TRACTOR CUSTOM PARTS MANUAL-POWER SHIFT, LOW 2RN00001-UP (MACHINE)
D5H LGP Series II Track-Type Tractors Power Shift 1DD04000-UP (MACHINE) POWERED BY 3304 Engine
D5H & D5H LGP SERIES II TRACTORS - DIRECT DRIVE 7NC04000-UP (MACHINE) POWERED BY 3304 ENGINE
D6M & D6M LGP Track-Type Tractor 2RN00001-UP (MACHINE) POWERED BY 3116 Engine
D6M TRACK-TYPE TRACTOR XL, LGP 3WN00001-UP (MACHINE) POWERED BY 3116 Engine
D6N XL, FTC, LGP TRACK-TYPE TRACTOR ALH00001-UP (MACHINE) POWERED BY 3126B Engine
D6N XL, D/S, LGP TRACK-TYPE TRACTOR AKM00001-UP (MACHINE) POWERED BY 3126B Engine


Parts shoe Caterpillar catalog:

8H1141 SHOE-POLE
1140, 1150, 1160, 120G, 120M, 12E, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14E, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 160M, 163H, 163H NA, 1673, 1...
1321336 SHOE - TRACK MASTER
D5R LGP, D6M, D6N, D6N LGP
1321334 SHOE - TRACK
D5R LGP, D6M, D6N, D6N LGP
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.