1210141 SHOE-TRACK Caterpillar parts
328D LCR, 330 FM L, 330 L, 330B L, 330C, 330C L, 330D L, 330D LN, 330D MH, 336D L
Rating:
Alternative (cross code) number:
CA1210141
121-0141
1210141
CA1210141
121-0141
1210141
Weight: 81 pounds 36 kg.
Information:
BOLT HOLE SIZE
23
mm
BOLT HOLE SPACING A
25
mm
BOLT HOLE SPACING B
140
mm
BOLT HOLE SPACING C
76
mm
BOLT HOLE SPACING D
0
mm
PITCH
216
mm
WIDTH
750
mm
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Lokar 1210141 Anchor-Tight Blue Firewall Mount Transmission Dipstick with Lock for Powerglide OEM and Aftermarket Transmission
Lokar No filler tube needed || Eliminates expulsion of dipstick handle || Bolted in sealed pan fitting || Accepts standard transmission funnels || Made from 6061 aluminum
Lokar No filler tube needed || Eliminates expulsion of dipstick handle || Bolted in sealed pan fitting || Accepts standard transmission funnels || Made from 6061 aluminum
Lokar 1210141 Anchor-Tight Blue Firewall Mount Transmission Dipstick with Lock for Powerglide OEM and Aftermarket Transmission
Lokar No filler tube needed || Eliminates expulsion of dipstick handle || Bolted in sealed pan fitting || Accepts standard transmission funnels || Made from 6061 aluminum
Lokar No filler tube needed || Eliminates expulsion of dipstick handle || Bolted in sealed pan fitting || Accepts standard transmission funnels || Made from 6061 aluminum
PantsSaver 1210141 Car Mat, Black
PantsSaver Custom designed to fit your car exactly, Install in seconds, no cutting or tools required || Features a patented Pants Saver central pan that holds and traps up to 500ml (16-Ounce) of water and keeps you and your vehicle's interior clean and dry || Lifetime warranty against cracking or breaking
PantsSaver Custom designed to fit your car exactly, Install in seconds, no cutting or tools required || Features a patented Pants Saver central pan that holds and traps up to 500ml (16-Ounce) of water and keeps you and your vehicle's interior clean and dry || Lifetime warranty against cracking or breaking
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 1210141:
Information:
Required Parts
Table 1
Required Parts
Item Part Number Description Qty
1 4L-6454 Bolt 1
2 7K-1181 Cable Strap 4
3 8T-4121 Hard Washer 2
4 8T-4136 Bolt 1
5 250-6052 Hose 1
6 277-1873 Clip (Ladder) 1
7 281-7377 Duct 1
8 321-6730 Plate As 1 Procedure
Move the machine to a smooth, horizontal location that is away from operating machines and away from personnel.Note: Permit only one operator on the machine. Keep all other personnel away from the machine or in the operator's sight.
Place the steering control lever in the NEUTRAL position.
Engage the parking brake.
Lower the attachments to the ground.
Stop the engine.
Illustration 1 g01624763
Illustration 2 g01624794
Open the right hand side engine access panel.
Remove the following components:
Band clamps (9)
Cable straps (10)
Existing duct (11)
Existing hose (12)
Ladder Clip (13) Retain all band clamps and ladder clip for later use.
Inspect hose (12) for damage. This hose may have been worn from the previous duct assembly. If the hose is damaged replace the damaged hose with hose (5) .
Illustration 3 g01624780
Install plate assembly (8) onto existing bracket (14) that is also seen in Illustration 2. Use two washers (15) and two bolts (16) in order to mount the new plate.
Install ladder clip (13) onto new bracket (8) with washer (3) and bolt (4) .
Illustration 4 g01624880
Use bolt (1) and washer (3) in order to install ladder clip (6) onto bracket (17) .
Illustration 5 g01624917
Connect duct (7) to the alternator with band clamp (11) .
Route duct (7) up to ladder clip (6), and attach with cable strap (2) .
Ensure that there is no contact with duct (7) and battery cable (18) .
Illustration 6 g01624914
Route duct (7) to both ladder clips (13) and connect with cable strap (2) .
Ensure that there is no contact between duct (7) and the frame of the access pannel.
Illustration 7 g01624916
Route duct (7) up to previous ladder clip (19) and attach with cable strap (2) .
Attach band clamp (9) onto the end of duct (7) .
Ensure that there is no contact between duct (7) and hose (5) .
Illustration 8 g01624918
Complete view of the duct routing.Note: Ensure that duct (7) does not make contact with any components that may cause wear from rubbing.
Table 1
Required Parts
Item Part Number Description Qty
1 4L-6454 Bolt 1
2 7K-1181 Cable Strap 4
3 8T-4121 Hard Washer 2
4 8T-4136 Bolt 1
5 250-6052 Hose 1
6 277-1873 Clip (Ladder) 1
7 281-7377 Duct 1
8 321-6730 Plate As 1 Procedure
Move the machine to a smooth, horizontal location that is away from operating machines and away from personnel.Note: Permit only one operator on the machine. Keep all other personnel away from the machine or in the operator's sight.
Place the steering control lever in the NEUTRAL position.
Engage the parking brake.
Lower the attachments to the ground.
Stop the engine.
Illustration 1 g01624763
Illustration 2 g01624794
Open the right hand side engine access panel.
Remove the following components:
Band clamps (9)
Cable straps (10)
Existing duct (11)
Existing hose (12)
Ladder Clip (13) Retain all band clamps and ladder clip for later use.
Inspect hose (12) for damage. This hose may have been worn from the previous duct assembly. If the hose is damaged replace the damaged hose with hose (5) .
Illustration 3 g01624780
Install plate assembly (8) onto existing bracket (14) that is also seen in Illustration 2. Use two washers (15) and two bolts (16) in order to mount the new plate.
Install ladder clip (13) onto new bracket (8) with washer (3) and bolt (4) .
Illustration 4 g01624880
Use bolt (1) and washer (3) in order to install ladder clip (6) onto bracket (17) .
Illustration 5 g01624917
Connect duct (7) to the alternator with band clamp (11) .
Route duct (7) up to ladder clip (6), and attach with cable strap (2) .
Ensure that there is no contact with duct (7) and battery cable (18) .
Illustration 6 g01624914
Route duct (7) to both ladder clips (13) and connect with cable strap (2) .
Ensure that there is no contact between duct (7) and the frame of the access pannel.
Illustration 7 g01624916
Route duct (7) up to previous ladder clip (19) and attach with cable strap (2) .
Attach band clamp (9) onto the end of duct (7) .
Ensure that there is no contact between duct (7) and hose (5) .
Illustration 8 g01624918
Complete view of the duct routing.Note: Ensure that duct (7) does not make contact with any components that may cause wear from rubbing.
Caterpillar parts catalog:
Parts shoe Caterpillar catalog:
1140, 1150, 1160, 120G, 120M, 12E, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14E, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 160M, 163H, 163H NA, 1673, 1...
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 1390, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1693, 16H NA, 16M, 2290, 235, 235D, 2390, 2391,...
312D, 325C, 328D LCR, 330, 330 FM L, 330B, 330B L, 330C, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, OEMS
325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330C MH, 330D L, 336D, 336D L, 336E L, 336E LH, 336E LN, 336F L, OEMS
325C, 330, 330 FM L, 330B, 330B L, 330C, 330C L, 330C MH, OEMS
1504764
SHOE-TRACK
330C, 330D L, 330D MH, 345B, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 349D, 349D L
330C, 330D L, 330D MH, 345B, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 349D, 349D L
1504768
SHOE-TRACK
330D L, 345B, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
330D L, 345B, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
2388591
SHOE-TRACK
328D LCR, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
328D LCR, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
2192748
SHOE-TRACK
330C L, 345D L
330C L, 345D L
6Y2757
SHOE-TRACK
330, 330 L
330, 330 L
1682133
SHOE-TRACK
330B L
330B L
1752995
SHOE-TRACK
330B L
330B L
3210980
SHOE-TRACK
OEMS
OEMS
3540190
SHOE-TRACK
336E, OEMS
336E, OEMS
3540191
SHOE-TRACK
336E, OEMS
336E, OEMS
3012279
SHOE-TRACK
385C, 385C L, 390D, 390D L, 390F L
385C, 385C L, 390D, 390D L, 390F L
2832115
SHOE-TRACK
385C
385C
1740226
SHOE-TRACK
385B, 385C, 385C L
385B, 385C, 385C L
3480437
SHOE-TRACK
323D L
323D L
1210137
SHOE-TRACK
325 L, 325B L, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E LN
325 L, 325B L, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E LN
1210138
SHOE-TRACK
325 L, 325B L, 325C, 325D, 325D L, 329D L, 329D LN, 329E L, 329E LN
325 L, 325B L, 325C, 325D, 325D L, 329D L, 329D LN, 329E L, 329E LN
3012285
SHOE-TRACK
385C, 385C L, 385C L MH, 390D, 390D L, 390F L
385C, 385C L, 385C L MH, 390D, 390D L, 390F L
3012283
SHOE-TRACK
385C, 385C L, 390D, 390D L, 390F L
385C, 385C L, 390D, 390D L, 390F L
1504770
SHOE-TRACK
330D L, 330D MH, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG
330D L, 330D MH, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG