SHOE-TRACK 1986987 - Caterpillar

1986987 SHOE-TRACK Caterpillar parts D3G, D3K XL, D3K2 LGP, D4G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1986987
198-6987
1986987

Weight: 14 pounds 6 kg.

Information:

BOLT HOLE SIZE 14.96 mm

BOLT HOLE SPACING A 7.92 mm

BOLT HOLE SPACING B 88.92 mm

BOLT HOLE SPACING C 54.86 mm

BOLT HOLE SPACING D 28 mm

PITCH 155.5 mm

WIDTH 405 mm

Buy SHOE-TRACK 1986987 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

1986987 - Shoe 16 STD - D3 9/16 fits Caterpillar (CAT)

$38.93

16 Jul 2022

US: Florida-Parts-Z

1986987 - Shoe 16 STD - D3 9/16 fits Caterpillar (CAT)
FIRST PRICE PARTS

For full view, you need register

Compatible equipment models: 1986987:

TRACK-TYPE TRACTOR D3G D3K XL D3K2 LGP D4G Caterpillar

Information:

(1) Spacer block.(2) Thrust pin. Tighten pin to a torque of ... 48 7 N m (35 5 lb ft)(3) Gear. Maximum temperature of gear when shrinking in place ... 300°C (572°F)(4) Camshaft. Diameter of camshaft journals (new) ... 74.850 0.025 mm (2.9470 .0010 in)(5) Key.(6) Camshaft journal (rear). Diameter of camshaft journals (new) ... 74.815 0.025 mm (2.9450 .0010 in) Assemble with journal part no. and "rear" on this side. Maximum temperature of journal when shrinking in place is 300°C (572°F).(7) Gear. Maximum temperature of gear when shrinking in place ... 300°C (572°F)
(9) Height of camshaft lobes.
Typical example exhaust, intake, and injector lobes.To find lobe height, use the procedure that follows: a. Measure camshaft lobe height (9).b. Measure base circle (10).Exhaust ... 55.0 0.4 mm (2.17 .02 in)Intake ... 51.0 0.4 mm (2.01 .02 in)c. Subtract base circle (step b) from lobe height (step a). The difference is actual lobe lift (11).d. Specified camshaft lobe lift is:Exhaust lobe ... 9.550 mm (.3760 in)Intake lobe ... 11.371 mm (.4480 in)Injector lobe ... 10.474 mm (.4124 in)Minimum permissible difference between actual lobe lift (STEP C) and specified lobe lift (STEP D) is ... 0.13 mm (.005 in)