AVSPARE.COM
parts catalog

SHOE 1P9807 - Caterpillar


1P9807 SHOE Caterpillar parts D7F, D7G
Rating:
11
Alternative (cross code) number:
CA1P9807
1P-9807
1P9807
Caterpillar 1P9807 SHOE
Weight: 40 pounds 18 kg.
Information:
BOLT HOLE SIZE  19.38  mm
BOLT HOLE SPACING A  19.05  mm
BOLT HOLE SPACING B  146.05  mm
BOLT HOLE SPACING C  76.2  mm
BOLT HOLE SPACING D  46  mm
PITCH  215.9  mm
WIDTH  510  mm

Buy SHOE 1P9807 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 1P9807:

TRACK-TYPE TRACTOR  D7F   D7G   Caterpillar
Number on catalog scheme: 1
  For full view, you need register

Information:


Personal injury or death can result from a brake malfunction. Do not operate the machine if the parking brake was engaged due to a malfunction of the hydraulic oil system or the service brakes.Correct any problem before attempting to operate the machine.
Before you operate the machine, and after the parking brake has been serviced, be sure you adjust the parking brake mechanism.Failure to do so could damage the parking brake components or prevent the parking brake from functioning correctly.
Machine Preparation
Prepare the machine for testing by completing the procedure that is specified in the Service Manual module Testing and Adjusting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.The parking brake and the actuator are located on the front frame of the machine.
When the parking brakes are released manually, the machine has no brakes.To avoid possible personal injury, the tires must be blocked securely before the parking brakes are manually released.
Manual Release Procedure
Illustration 1 g00869101
Parking Brake Actuator Assembly (1) Parking brake actuator. (2) Locknut. (3) Rod.
Loosen locknut (2) down rod (3) to a length of 19 mm (.75 inch). Turn rod (3) counterclockwise until the rod moves out enough to totally disengage the parking brake. Keep a record of the number of counterclockwise turns required in order to return the rod to the original position when the procedure is done.
Tighten locknut (2) to rod (3) .
When the manual release of the parking brake is no longer necessary, loosen locknut (2). Turn rod (3) clockwise to the original position.
The parking brake should be tested for proper operation after this procedure is done.Reference: For additional information on testing the parking brake, refer to the Service Manual module Testing And Adjusting, "Parking Brake - Test".

Caterpillar parts catalog:

Caterpillar parts catalog
D7F TRACTOR / DIRECT DRIVE / 93N00001-01174 (MACHINE)
D7F TRACTOR 94N00001-05191 (MACHINE)
D7F TRACTOR 94N05192-UP (MACHINE)
D7F TRACTOR 93N01175-UP (MACHINE)
D7F TRACTOR 94N05192-UP (MACHINE)
D7F TRACTOR 93N01175-UP (MACHINE)
D7G TRACK-TYPE TRACTOR / POWER SHIFT / 65V00001-03400 (MACHINE) POWERED BY 3306 ENGINE
D7G TRACTOR / DIRECT DRIVE / 45W00407-UP (MACHINE) POWERED BY 3306 ENGINE
D7G TRACTOR / POWERSHIFT / 44W00441-UP (MACHINE) POWERED BY 3306 ENGINE
D7G TRACTOR POWERSHIFT 65V07701-UP (MACHINE) POWERED BY 3306 ENGINE
D7G TRACTOR 3GF00001-UP (MACHINE)
D7G TRACTOR POWERSHIFT 65V07701-UP (MACHINE) POWERED BY 3306 ENGINE
D7G TRACK-TYPE TRACTOR / DIRECT DRIVE / 64V00995-UP (MACHINE) POWERED BY 3306 ENGINE
D7G TRACK-TYPE TRACTOR / POWER SHIFT / 65V03401-UP (MACHINE) POWERED BY 3306 ENGINE


Parts shoe Caterpillar catalog:

1P9808 SHOE
571G, D7F, D7G, D7G2
3P0617 SHOE (master)
571G, 572G, D7G, D7G2
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.