SHOE-TRACK MASTER 1Q4994 - Caterpillar

Illustration 1 g01120741
Note: Use 5P-3931 Anti-Seize Compound on the bolt threads.The tightening sequence for the cylinder head bolts follows:
In a numerical sequence, tighten bolt (1) through bolt (26) .Torque for bolts ... 270 25 N m (200 18 lb ft)
In a numerical sequence, tighten bolt (1) through bolt (26) .Torque for bolts ... 450 25 N m (330 18 lb ft)
In a numerical sequence, again tighten bolt (1) through bolt (26) .Torque for bolts ... 450 25 N m (330 18 lb ft)
In a numerical sequence, tighten nut (27) through nut (39) .Torque for nuts ... 47 7 N m (35 5 lb ft) (40) Tighten the exhaust manifold studs that are in each cylinder head to the following torque. ... 35 5 N m (26 4 lb ft)
Illustration 2 g01120809
(41) Height of new cylinder head ... 112.78 0.25 mm (4.440 0.010 inch)
Illustration 3 g01120813
Note: Use 6V-6640 Sealant on the plugs. (42) The plugs are installed into the cylinder head at the following depth. ... 4.5 0.5 mm (0.18 0.02 inch) (43) The plugs are installed into the cylinder head at the following depth. ... 2.0 0.5 mm (0.08 0.02 inch)
Illustration 4 g01046957
Note: Use 5P-3931 Anti-Seize Compound on the bolt threads. (44) Tighten the sleeve to the following torque. ... 100 10 N m (75 7 lb ft)