SHOE-TRACK 2323326 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
B     150-3152     Sleeve Installer     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01025481
Install new O-ring seals (2) on electronic unit injector sleeve (1) .
Place electronic unit injector sleeve (1) on Tooling (B) .
Lubricate the new O-ring seals with clean engine oil and position the electronic unit injector sleeve in the cylinder head.
Install electronic unit injector sleeve (1) in the cylinder head with a hammer.End By: Install the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Install".