SHOE-TRACK 2346084 - Caterpillar

Illustration 1 g01242511
Schematic for Single Camera System
Illustration 2 g01242515
Schematic for Multi Camera System
Illustration 3 g01241812Note: If the camera is to be on at all times during machine operation, a wire jumper must be installed from pin 3 (camera trigger) to pin 1 (system power).
Illustration 4 g01241814Note: The switched +12/24 vdc, ground, and trigger inputs (that are equal to or greater than +11 vdc) for the display are to be provided by the customer.Note: The WAVS is configured in order to designate camera 3 (C3) as the highest priority camera input, and camera 1 (C1) as the lowest priority camera input. When multiple triggers are active, the camera with the highest priority will be shown on display.