SHOE-TRACK 2447568 - Caterpillar

Adjustment of the Parameters for the Hydraulic Circuit for the Grapple and Hydraulic Cab Riser
Use the following Illustration to operate the monitor.
Illustration 1 g02207953
Monitor Panel (1) Up key (2) Right key (3) Home key (4) Main menu key (5) Left key (6) Down key (7) Cancel key (8) OK keyIn order to program any of the parameters of the machine, first enter the "SERVICE MODE" on the monitor.
From the default screen, press the main menu key (4) .
Illustration 2 g02207954
From the "MAIN MENU" screen, use the right key (2) to scroll through the menu options.
When the "SERVICE" option is highlighted, press the OK key (8). Refer to Illustration 2.
Illustration 3 g02207956
When "PASSWORD" screen appears, use the right key (2) and the left key (5) in order to scroll through the characters. When the desired character is highlighted, press the OK key (8) .
Enter the password for service FFF2 in order to continue to the "SERVICE" screen. Refer to Illustration 3.
Illustration 4 g02033104
After the password has been entered, the "SERVICE" screen should appear.
From the "SERVICE" screen, use the down key (6) to scroll through the menu options.
When the "TOOL PROGRAM" option is highlighted, press the OK key (8) .
Illustration 5 g02033106
Typical example for a grapple or magnet.
From the "TOOL PROGRAM" screen, use the down key (6) to scroll through the menu options.
When the desired item is highlighted press the OK key (8). Refer to Illustration 5.
Illustration 6 g02033108
After pressing the OK key (8), the "TOOL #??" screen should appear. "GRAPPLE" parameters that can be changed are located in Table 1. To change the parameters, highlight the desired parameter and press the OK key (8).
Table 1
"SERVICE" / "TOOL PROGRAM" / "GRAPPLE" (1)    
Display    Description    
"NAME"     Name of the tool    
"MAX DIAL"     Maximum position of the dial for the throttle    
"MIN DIAL"     Minimum position of the dial for the throttle    
"UNDERSPEED ENABLE"     Enabling of the underspeed option    
" HYD TEMP"     Threshold for the warning of high hydraulic temperature    
"COMBINER ENABLE"     Combined two pump flow    
"INIT PUMP POWER RED"     Initial power reduction for the medium pressure circuits main pump    
"TOTAL PUMP POW RED"     Total power reduction for the medium pressure circuits main pump    
"A1 FLOW"     Flow setting for the grapple attachment valve
(
200 L/min (53 US gpm)) Default    
"A1 MULTI ADD FLOW"     Additional flow for the grapple attachment valve during multiple operations    
"A1 NOMINAL PRES"     Nominal pressure for the grapple attachment valve
16000 kPa (2321 psi)    
"A2 FLOW"     Flow setting for the grapple rotate attachment valve    
"A2 MULTI ADD FLOW"     Additional flow for the grapple rotate attachment valve during multiple operations    
"A2 NOMINAL PRES"     Nominal pressure for the grapple rotate attachment valve
(Normal) Default    
"A2 OPEN TIME"     Open time for the grapple rotate attachment valve
Default (0.4 sec)
Range (2) (0.1