SHOE-TRACK 2465726 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tools Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 8T-0914 Flywheel Guide Pin 2
4C-9426 Damper Guide Pin 2
1U-9392 Damper Guide Pin 2
1U-9393 Damper Guide Pin 2 Start By:
Remove the damper guard group.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Select the guide pins in accordance with the proper application.
Illustration 1 g00609896
This is an Illustration of the G3616 Engine Damper Guard (X).
Illustration 2 g00609902
This is an Illustration of Dual Vibration Dampers.
Illustration 3 g00609906Note: The later vibration dampers have finned covers. Be careful not to damage the fins.
Remove the two bolts (1) that hold the vibration damper (2). Install Tool (A).
Place a nylon strap through the center of the vibration damper (2), and fasten the nylon strap to a hoist. The weight of a narrow vibration damper is approximately 288 kg (639 lb). The weight of a wide vibration damper is approximately 402 kg (886 lb).
Remove the rest of the bolts that hold the vibration damper (2) to the adapter, and remove the adapter. Remove Tool (A).
Illustration 4 g00609910
Remove the two top bolts that hold the adapter (3) and the vibration damper (4). Remove Tool (B).
Remove the rest of the bolts, and remove the adapter (3).
Illustration 5 g00609915
Move the vibration damper (4) onto Tool (B) until a nylon strap can be placed through the center of the vibration damper (4).
Fasten the nylon strap to a hoist, and remove the vibration damper. The weight of a narrow vibration damper is approximately 288 kg (639 lb). The weight of a wide vibration damper is approximately 402 kg (882 lb).
Illustration 6 g00609918
Remove the spacer (5).