SHOE AS-BRAKE 2839982 - Caterpillar

Connect heater hose (33). Connect harness assemblies (34).
Illustration 24 g01151837
Connect tube assemblies (29). Connect harness assemblies (30), (31) and (32).
Illustration 25 g01151812
Install clip (28) to the bottom right side of the bell housing.
Illustration 26 g01151799
Move harness assembly (26) into position. Install all necessary cable straps (27). Connect harness assembly (25) for the heater.
Illustration 27 g01151737
Connect harness assemblies (21), (22), and (23) from alternator (24). Install all necessary cable straps (20).
Illustration 28 g01151731
Connect harness assemblies (17) and harness assembly (18) to electric starting motor (16). Install all necessary cable straps (19) .
Illustration 29 g01148450
Use two people in order to install frame assembly (14). The weight of frame assembly (14) is approximately 20 kg (45 lb). Install bolt (15) to each side of the machine.
Illustration 30 g01148446
Install bolt (13). Repeat for the other side.
Illustration 31 g01148437
Connect hose (11) and harness assembly (12) .
Illustration 32 g01148413
Connect hoses (8) and harness assemblies (10) to tank (9) .
Illustration 33 g01239418
Install cover (7) .
Illustration 34 g01148411
Install exhaust pipe (6) .
Illustration 35 g01148407
Install plate (5) .
Illustration 36 g01148402
Install floor mat (2). Install plate (4) and bolts (3). Repeat for the other side of the cab.
Illustration 37 g01114620
Connect ground cable assembly (1) .End By: Install the radiator, the refrigerant condenser, and the oil coolers. Refer to Disassembly and Assembly, "Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Install".