SHOE-TRACK 3105823 - Caterpillar

Remove bolts (17).
Illustration 13 g01318676
Position seat assembly (18) in order to attach a suitable lifting device to seat (18). The weight of seat assembly (18) is approximately 52 kg (115 lb).
Remove seat assembly (18) from the cab. Installation Procedure
Illustration 14 g01318676
Use a suitable lifting device in order to install seat assembly (18). The weight of seat assembly (18) is approximately 52 kg (115 lb).
Position seat assembly (17) into the cab.
Illustration 15 g01318672
Install bolts (17).
Illustration 16 g01318670
Connect harness assembly (16).
Illustration 17 g01318662
Position console (14) and install bolts (15) onto both ends of console (14).
Illustration 18 g01318657
Install cover (13). Install screws (12).
Illustration 19 g01318653
Connect harness assemblies (10) onto cover assembly (11). Install cover assembly (11).
Illustration 20 g01318647
Illustration 21 g01318680
Install armrest (9). Install knob (8).
Install screw (7). Tighten screw (7) to a torque of 6 1 N m (53 9 lb in).
Illustration 22 g01318646
Connect harness assembly (6).
Illustration 23 g01318645
Install bolts (5).
Illustration 24 g01318643
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install gas spring (4).
Illustration 25 g01318642
Illustration 26 g01318641
Install cover (3).
Install screw (2). Tighten screw (2) to a torque of 6 1 N m (53 9 lb in). Install screw (1). Tighten screw (1) to a torque of 6 1 N m (53 9 lb in).