SHOE-TCK MST- 3156693 - Caterpillar

The dual hopper mode has two settings ON and OFF. Use keys (5) and (6) in order to scroll through the control list. Highlight the "Dual Hopper Mode" and press the ok key (9) in order to change the selection and accept the selection.There are two switches that are located on the operator console that control the right hopper and the left hopper. The switches may be configured to raise and lower the hoppers simultaneously or separately. When dual hopper mode is ON, either hopper switch can be used to raise both hoppers or lower both hoppers. When dual hopper mode is OFF, each switch controls only the one hopper side intended for that switch.Dual Hopper & Apron Mode
Illustration 46 g01357654
The dual hopper & apron mode has two settings ON and OFF. Use keys (5) and (6) in order to scroll through the control list. Highlight the "Dual Hopper Mode & Apron" and press the ok key (9) in order to change the selection and accept the selection.The operator may configure the apron fold switch to work in conjunction with the hopper raise and lower switch. When dual hopper & apron mode is on, and in dual hopper mode, the apron raise switch will raise both the hoppers and the apron. The apron will start to raise about 1.0 second after the hoppers start to raise. Use the apron switch to lower both the hoppers and the apron simultaneously. When dual hopper & apron mode is off, the switches work independently from the hopper raise and lower switches.Raise Lock De-Act. SW Pos.
See "Hot Keys" for information concerning the "Screed Lift Lock Control Key".
Illustration 47 g01357654
The "Raise Lock De-Act. SW Pos." has two settings ON and OFF. Use keys (5) and (6) in order to scroll through the control list. Highlight the "Raise Lock De-Act. SW Pos." and press the ok key (9) in order to change the selection and accept the selection.Raise Lock De-Act. Time
See "Hot Keys" for information concerning the "Screed Lift Lock Control Key".
Illustration 48 g01357654
Use keys (5) and (6) in order to scroll through the control menu. Highlight the "Raise Lock De-Act. Time" field and press the ok key