SHOE-TRACK 3261126 - Caterpillar

Illustration 1 g06318083
(1) 546-2532 Access Door As
Table 1
Required Parts
Item Qty New Part Number Part Name Former Part Number
1 2 546-2532 Access Door As 442-2926 New engine access door assembly (1) replaces the former engine access door assembly (A) in the 498-1421 Operator Platform Gp.Rework Procedure for Existing Engine Access Door Assembly
Illustration 2 g06318299
(A) 442-2926 Access Door AsUse the following procedure to rework existing engine access door assembly (A) into the new engine access door assembly (1).
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Illustration 3 g06318017
(D1) 6.35 mm (0.250 inch) X 45 degrees
(D2) 6.35 mm (0.250 inch)
(D3) 31.75 mm (1.250 inch)
(D4) 590.55 mm (23.250 inch)
(2) 548-3242 Rib
Fabricate rib (2) as per the dimensions shown in Illustration 3. Use structural steel (minimum yield strength of 290 to 500 MPa (42061 to 72519 psi)) of ASTM A656/A656M Grade 50.
Illustration 4 g06318131
(D5) 249.2 mm (9.81 inch)
(D6) 242.9 mm (9.56 inch)
(D7) 492.5 mm (19.39 inch)
(D8) 486.2 mm (19.14 inch)
(W1) 3 mm (0.1 inch) fillet weld on both sides
(W2) ( 50 X 200 ) 3 mm (0.1 inch) fillet weld on both sides
(A) 442-2926 Access Door As
(2) 548-3242 Rib
Weld eight ribs (2) onto engine access door (A) as per the dimensions shown in Illustration 4. Refer to Special Instruction, REHS1841, "General Welding Procedures".