3P3892 SHOE-TRACK MASTER Caterpillar parts
D5B, OEMS
Rating:
Alternative (cross code) number:
CA3P3892
3P-3892
3P3892
CA3P3892
3P-3892
3P3892
Weight: 34 pounds 15 kg.
Information:
BOLT HOLE SIZE
16.48
mm
BOLT HOLE SPACING A
13.89
mm
BOLT HOLE SPACING B
120.6
mm
BOLT HOLE SPACING C
44.45
mm
BOLT HOLE SPACING D
46
mm
PITCH
170
mm
WIDTH
610
mm
TRACK-TYPE TRACTOR, UNDERCARRIAGE,
Number on catalog scheme:
5
For full view, you need register
Information:
Sudden movement or accidental starting of the machine can cause personal injury or death to persons on or near the machine.To prevent personal injury or death, perform the following:Park the machine on a smooth, level surface.Lower the work tool to the ground and engage the parking brake.Stop the engine and remove the key.Block the wheels and install the steering frame lock.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Specifications
Table 1
Pilot Pressure - High Idle
3500 345 kPa (508 50 psi) Introduction
There are two pilot systems that are generated from the fan/brake valve in the hydraulic service center.
The primary steering pilot system supplies pilot pressure to the steering system.
The implement/redundant steering pilot system supplies pilot pressure to the implement system and the steering system if the primary steering system fails.Required Tools
Illustration 1 g02571852
Tooling (A) 198-4240 Digital Pressure Indicator Gp
Table 2
Required Tools
Tool Item Qty Part No Description
A 198-4240 Digital Pressure Indicator Gp
A1 1 198-4234 Digital Indicator
A2 1 198-4239 Pressure Sensor Gp
(0 to 41,368 kPa (0 to 6,000 psi))
A3 1 198-4236 Adapter Cable As Check Preparation
Move the machine to a smooth, horizontal location that is away from operating machines and away from personnel.
Place the transmission direction in the NEUTRAL position.
Engage the parking brake.
Lower the work tool to the ground.
Stop the engine.
Relieve the pressure in the hydraulic system. Reference: For more information about relieving the hydraulic pressure, refer to the Service Manual module Testing and Adjusting, "System Pressure - Release" for the machine that is being serviced.
Install the steering frame lock. Test Procedure
Illustration 2 g03858441
(1) Implement load sense pressure
(2) Implement/ Steering pilot pressure
Install tooling (A) to test port (2).
Start the engine and warm up the hydraulics if necessary. The hydraulic oil temperature should be at least 60° C (140° F).
Increase the engine speed to high idle.
Observe the pilot pressure on tooling (A), the pressure should be 3500 345 kPa (508 50 psi).
Lower the engine speed to low idle.
Stop the engine.
Remove tooling (A). Check complete.Adjustment Procedure
Illustration 3 g03662955
Brake/ Fan valve located in hydraulic service center on the right side of machine
Locate the implement/redundant steering pilot pressure reducing valve (PRV) (3) on the side of the fan/brake valve (A) in the service center. Use a hex wrench to loosen the lock-nut and an internal hex wrench to adjust the pilot pressure.
To increase pressure:
Hold the
Caterpillar parts catalog:
Parts shoe Caterpillar catalog:
315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320B FM LL, 320B U, 320C, 320C FM, 320D, 320D GC, 320D L, 320D...
315, 315B L, 315C, 315D L, 317, 317B LN, 318B, 318C, 318E L, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320B U, 320C, 320C FM, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E ...
311, 311B, 315B L, 317, 317B LN, 318B, 318C, 319D, 320, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D L, 320D LRR, 320D RR, 320N, 321B, 321C, 321D LCR, 322, 322 FM L, 322 ...
312D, 325C, 328D LCR, 330, 330 FM L, 330B, 330B L, 330C, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336E, 336E H, 336E L, 336E LH, 336E LN, OEMS
561C, 953C, D5, D5B
561C, D5, D5B
D5B, D6D, D7G
322 FM L, 322B L, 322C, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 336D L, 345C, OEMS
322C, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C L, 325D, 325D L, 325D MH, 329D, 329D L, 329D LN, 329E, 329E LN, OEMS
325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330C MH, 330D L, 336D, 336D L, 336E L, 336E LH, 336E LN, 336F L, OEMS
325C, 330, 330 FM L, 330B, 330B L, 330C, 330C L, 330C MH, OEMS
7S0706
SHOE-TRACK
D5B, OEMS
D5B, OEMS
7S0706
SHOE-TRACK
D5B, OEMS
D5B, OEMS
1298084
SHOE-TRACK
325D, OEMS
325D, OEMS
1298083
SHOE-TRACK
OEMS
OEMS
2086044
SHOE-TRACK
OEMS
OEMS
1504767
SHOE-TRACK
330D L, 345B, 345B II, 345B L, 345C, 345C L, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, OEMS
330D L, 345B, 345B II, 345B L, 345C, 345C L, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, OEMS
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
3086304
SHOE-CIRCLE GUIDE
14M, 16M
14M, 16M
3192227
SHOE-CIRCLE GUIDE
24H, 24M
24H, 24M
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
14G, 14H, 14H NA, 16G, 16H, 16H NA, 24H
2446367
SHOE-TRACK
330C, 330D L, 336D L
330C, 330D L, 336D L