SHOE-TRACK 3T5756 - Caterpillar

Which Generate This Code:The Engine Control Module (ECM) detects that the keyswitch was cycled at least three times within one second.This indicates that the battery circuit to the keyswitch has an intermittent condition or a low battery condition while the engine is running.Note: This code can be generated by rapidly cycling the keyswitch. Some control modules on the vehicle require this action in order to prompt flash codes. If this occurs, clear the logged diagnostic codes in order to prevent future confusion or an incorrect diagnosis.Note: This code can also be generated when there is an attempt to restart the engine immediately after a shutdown. The engine may not start if the engine speed did not reach zero rpm prior to the restart.System Response:The ECM will log the diagnostic code and the ECM will trigger a snapshot. The check engine lamp will illuminate while this diagnostic code is active. The ECM will stop energizing the injector solenoids.Engine shutdownTest Step 1. Perform the following diagnostic procedure: Ignition Keyswitch Circuit and Battery Supply Circuit - TestResults:
OK - STOP