SHOE ASSEM. 4K3504 - Caterpillar

Lower the temperature of rotating group (30) .
Install rotating group (30) into housing (31) .
Install spacer (29) .
Use Tooling (A) in order to install retaining ring (28) .
Use a suitable press in order to press rotating group (30) against retaining ring (28) .
Install gasket (27) .
Illustration 3 g01181043
Install housing (25) and bolts (26) .
Install O-ring seal (23) .
Use Tooling (A) in order to install retaining ring (24) .
Illustration 4 g01181042
Install seal (22) .
Illustration 5 g01181041
Install cover (21) .
Use Tooling (A) in order to install retaining ring (20) .
Illustration 6 g01181040
Install pins (18) and bearings (19) .
Illustration 7 g01181039
Install spider assembly (17) .
Illustration 8 g01181038
Install bearing (15), barrel (16), and port plate (14) .
Illustration 9 g01181037
Install plate (13) .
Illustration 10 g01181036
Install O-ring seals (11) and piston (12) .
Illustration 11 g01181035
Install cover (10) and bolts (9) .
Illustration 12 g01181034
Install spool (6) .
Install retainer (7) and spring (8) .
Illustration 13 g01181033
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plug (5) .
Install plug (4) .
Repeat Step 20 through Step 21 for the opposite side.
Illustration 14 g01181032
Install gasket (3) .
Illustration 15 g01181031
Install head (2) and bolts (1) .End By: Install the piston motor. Refer to Disassembly and Assembly, "Piston Motor - Install".