SHOE AS-PADDED 5373516 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 1U-9200 Lever Puller Hoist 1
C 9U-6904 Bearing Puller 1
9U-6800 Nut 1
8M-9012 Plate 1
4C-6504 Puller Rod 1
124-4641 Sleeve 1
5P-5201 Double Acting Cylinder 1
3S-6224 Electric Hydraulic Pump Gp 1 Start By:
Remove the track roller frames. Refer to Disassembly and Assembly, "Track Roller Frame - Remove".
Illustration 1 g00823029
Install Tooling (A) on pivot shaft (1). Fasten a suitable lifting device to the upper link bracket of Tooling (A).
Attach Tooling (B) to the bottom link bracket of Tooling (A). Attach the other end of Tooling (B) to a stationary object.
Illustration 2 g00826475
Use care when you slide pivot shaft (1) from the machine. Fasten another suitable lifting device to pivot shaft (1) for balance during the removal. The weight of pivot shaft (1) is approximately 551 kg (1215 lb).
Illustration 3 g01129754
Use Tooling (C) in order to remove pivot shaft bearings (2) from main frame (3). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
D 9U-6904 Bearing Puller 1
9U-6702 Puller Stud 1
9U-6800 Nut 1
8M-9012 Plate 1
5P-5201 Double Acting Cylinder 1
3S-6224 Electric Hydraulic Pump Gp 1
Illustration 4 g00821968
Illustration 5 g01129760
Use Tooling (D) in order to install pivot shaft bearings (2) into main frame (3).
Illustration 6 g00826475
Attach a suitable lifting device to pivot shaft (1). The weight of pivot shaft (1) is approximately 551 kg (1215 lb). Install pivot shaft (1) into the main frame. Slide pivot shaft (1) into the main frame until pivot shaft (1) extends equally on both sides. End By:
Install the track roller frames. Refer to Disassembly and Assembly, "Track Roller Frame - Install".