SHOE-TRACK 6T2779 - Caterpillar

6T2779 SHOE-TRACK Caterpillar parts D3B, D3C, D3C II

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6T2779
6T-2779
6T2779

Weight: 34 pounds 15 kg.

Information:

BOLT HOLE SIZE 15 mm

BOLT HOLE SPACING A 5.59 mm

BOLT HOLE SPACING B 38.74 mm

BOLT HOLE SPACING C 86 mm

WIDTH 990 mm

Buy SHOE-TRACK 6T2779 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 6T2779:

TRACK-TYPE TRACTOR D3B D3C D3C II Caterpillar

For full view, you need register

Information:

Removal Procedure
Illustration 1 g01010642
Place identification marks on the bellows for alignment and orientation during the installation.
Failure to follow established procedures can lead to damage of the parts.To avoid damage to the parts, always identify and mark the parts so that the parts can be installed in the same location.
The ends of the bellows are very sharp. Injury could occur if the bellows are not handled properly. Handle the bellows by the convolutions.
Note: Refer to Special Instruction , REHS1728, "Application Guideline for the Bellows" for additional information on handling the bellows.
Loosen clamp (2).
Position clamp (2) over bellows.
Loosen clamp (3).
Position clamp (3) over bellows.
Loosen clamp (4).
Loosen clamp (7).
Remove elbow (5) and elbow (6).
Disconnect oil supply tube assembly (9) and oil drain tube assembly (10).
Remove nuts (1).
Use a suitable lifting device. The weight of the turbocharger is approximately 29 kg (65 lb). Remove turbocharger (8).