SHOE-TRACK 6Y6303 - Caterpillar

Table 1
Required Parts    
Item    Qty    Pt. No.    Description    
1     1     172-4612     Elbow As    
2     1     4D-4917     Tee    
3     1     030-8324     Elbow    
4     1     3B-7743     Fitting    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Install caps and plugs on all openings in order to prevent dirt or debris from entering the system. Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will prevent dirt from entering the internal mechanism.
Park the machine on a smooth level surface. Refer to the Disassembly And Assembly Manual for the proper procedure.
Illustration 1 g01138386
Remove the following component from the torque converter: 9C-4937 Breather As (A), 7X-0495 Adapter (B), 002-6453 Elbow (C), 5P-7930 O-Ring Port Tee (D) and 3K-0360 O-Ring Seal (E) .
Illustration 2 g01138432
Install 172-4612 Elbow As (1) in the open port on the torque converter.
Move the hose assembly (F) from 5P-7930 O-Ring Port Tee to 172-4612 Elbow As (1) .
Remove 2H-3940 Elbow (G) from the transmission.
Install 4D-4917 Tee (2) in the open port on the transmission.
Move hose assembly (F) from 2H-3940 Elbow (G) to 4D-4917 Tee (2) .
Assemble 030-8324 Elbow (3). Orient the elbow upward. Assemble 3B-7743 Fitting (4) to the elbow. Assemble 9C-4937 Breather As (A) to the fitting.