7T0724 SHOE-TRACK Caterpillar parts
D10N, D10R, D10T, D10T2
Rating:
Alternative (cross code) number:
CA7T0724
7T-0724
7T0724
CA7T0724
7T-0724
7T0724
Weight: 92 pounds 41 kg.
Information:
BOLT HOLE SIZE
29.5
mm
BOLT HOLE SPACING A
30
mm
BOLT HOLE SPACING B
190
mm
BOLT HOLE SPACING C
80
mm
BOLT HOLE SPACING D
60
mm
PITCH
260.5
mm
WIDTH
610
mm
TRACK-TYPE TRACTOR,
This part in 2 request:
Show.
This information for suppliers only!
2023-02-13
2023-02-07
Information:
Disassembly Procedure
Start By:
Remove the load sheave block. Refer to Disassembly and Assembly, "Load Sheave Block (Upper) - Remove".
Illustration 1 g01230970
Use a suitable lifting device to position load sheave block (1) onto suitable blocking. The combined weight of load sheave block (1) and trunnion (5) is approximately 193 kg (425 lb).
Remove bolts (3) and plate (4) from load sheave block (1). Remove pin (2) and trunnion (5) from load sheave block (1) .
Illustration 2 g01231005
Illustration 3 g01231024
Remove bolt (6) and retainer (7) from load sheave block (1) .
Push pin assembly (8) (not shown) past sheave assembly (9) .
Remove sheave assembly (9) .
Illustration 4 g01231061
Remove washers (10) from sheave assembly (9) .
Illustration 5 g01231074
Remove seal (11) from sheave assembly (9) .
Illustration 6 g01231084
Use a suitable press in order to remove bearing (12) (not shown) from sheave assembly (9) .
Repeat Steps 3 through 8 for the remaining sheave assemblies.
Start By:
Remove the load sheave block. Refer to Disassembly and Assembly, "Load Sheave Block (Upper) - Remove".
Illustration 1 g01230970
Use a suitable lifting device to position load sheave block (1) onto suitable blocking. The combined weight of load sheave block (1) and trunnion (5) is approximately 193 kg (425 lb).
Remove bolts (3) and plate (4) from load sheave block (1). Remove pin (2) and trunnion (5) from load sheave block (1) .
Illustration 2 g01231005
Illustration 3 g01231024
Remove bolt (6) and retainer (7) from load sheave block (1) .
Push pin assembly (8) (not shown) past sheave assembly (9) .
Remove sheave assembly (9) .
Illustration 4 g01231061
Remove washers (10) from sheave assembly (9) .
Illustration 5 g01231074
Remove seal (11) from sheave assembly (9) .
Illustration 6 g01231084
Use a suitable press in order to remove bearing (12) (not shown) from sheave assembly (9) .
Repeat Steps 3 through 8 for the remaining sheave assemblies.
Caterpillar parts catalog:
Parts shoe Caterpillar catalog:
7F3488
SHOE-POLE
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 1390, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1693, 16H NA, 16M, 2290, 235, 235D, 2390, 2391,...
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 1390, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 1693, 16H NA, 16M, 2290, 235, 235D, 2390, 2391,...
3985285
SHOE-TRACK
D10T, D10T2
D10T, D10T2
3985286
SHOE-TRACK MASTER
D10T, D10T2
D10T, D10T2
3985287
SHOE-TRACK
D10T, D10T2
D10T, D10T2
3985288
SHOE-TRACK MASTER
D10T, D10T2
D10T, D10T2
3985289
SHOE-TRACK
D10T, D10T2
D10T, D10T2
3985290
SHOE-TRACK MASTER
D10T, D10T2
D10T, D10T2
3988314
SHOE-TRACK
D10T, D10T2
D10T, D10T2
3988315
SHOE-TRACK MASTER
D10T, D10T2
D10T, D10T2
3988316
SHOE-TRACK
D10T, D10T2
D10T, D10T2
3988317
SHOE-TRACK MASTER
D10T, D10T2
D10T, D10T2
3985256
SHOE-TRACK
D10T, D10T2
D10T, D10T2
9W1867
SHOE-TRACK MASTER
D10N, D10R, D10T
D10N, D10R, D10T
1Q4953
SHOE-TRACK
D10R
D10R
1Q4777
SHOE-TRACK
D10R
D10R
1Q4778
SHOE-TRACK
D10R
D10R
3261139
SHOE-TRACK
D7E, D7R, D7R II
D7E, D7R, D7R II
1156315
SHOE-TRACK
D7E, D7E LGP, D7H, D7R, D7R II, D7R XR
D7E, D7E LGP, D7H, D7R, D7R II, D7R XR
2346029
SHOE-TRACK MASTER
D10R, D10T
D10R, D10T
2346033
SHOE-TRACK
D10R, D10T, D10T2
D10R, D10T, D10T2
7T4607
SHOE-TRACK
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
9W1870
SHOE-MASTER TRACK
D10N, D10R, D10T
D10N, D10R, D10T