SHOE 7T2292 - Caterpillar

Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01623028
Attach Tooling (A), Tooling (B), and a suitable lifting device to hydraulic tank and filter (17). The weight of hydraulic tank and filter (17) is approximately 100 kg (220 lb). Use Tooling (A), Tooling (B), and the suitable lifting device in order to position hydraulic tank and filter (17).
Illustration 2 g01625207
Install two mount assemblies (26) (not shown), hard washers (25), bolts (24), and the nuts.
Illustration 3 g01625205
Install mount assemblies (21), hard washers (22), and bolts (23).
Illustration 4 g01625186
Install mount assemblies (20), hard washers (19), and bolts (18).
Illustration 5 g01625167
Install fitting (15). Connect hose assembly (16).
Illustration 6 g01625156
Connect clip (14).
Illustration 7 g01622989
Connect hose assembly (13).
Illustration 8 g01622982
Connect hoses (12).
Illustration 9 g01622959
Connect hose assembly (11) and hose assembly (10).
Illustration 10 g01622917
Connect hose assembly (9) and hose assembly (8).
Illustration 11 g01622880
Position the clip and install bolt (5). Connect harness assembly (7). Attach cable straps (6).
Illustration 12 g01622910
Connect clip (4) and clip (3). Connect hose (2).
Illustration 13 g01622906
Connect clamp (1). End By:
Install the piston pump for the implement. Refer to Disassembly and Assembly, "Piston Pump (Implement) - Install".
Install the gear pump for the hydraulic fan. Refer to Disassembly and Assembly, "Gear Pump (Hydraulic Fan) - Install".
Install the left side track brake. Refer to Disassembly and Assembly, "Track Brake - Install".
Install the left side hydrostatic piston motor. Refer to Disassembly and Assembly, "Piston Motor (Hydrostatic) - Install".
Install the rollover protective structure. Refer to Disassembly and Assembly, "Rollover Protective Structure (ROPS) - Remove and Install".